User's Manual

150Mbps Wireless N ADSL2/2+ Modem Router
www.phicomm.com
39
Chapter 4: Software Configuration
ACL
You can specify the client to access the ADSL Router once setting its IP as a Secure IP Address
through selected applications.
ACL: If Activated, the IP addresses which are contained in the Access Control List can access to
the Router. If Deactivated, all IP addresses can access to the Router.
ACL Rule Index: Select the ACL rule index for the entry.
Active: Enable the ACL rule.
Secure IP Address: Select the IP addresses which are permitted to access to the Router remotely.
With the default IP 0.0.0.0, any client would be allowed to remotely access the ADSL Router.
Application: Select the application for the ACL rule, and then you can access the Router through
it.
Interface: Select the interface for access: LAN, WAN or Both.
Access Control Listing: This displays the information about the ACL Rules.