User's Manual

150Mbps Wireless N ADSL2/2+ Modem Router
www.phicomm.com
51
Appendix A: Troubleshooting
make sure the VPI/VCI, Connection Type, username and pass word are correct. If there are any
mistakes, please correct the settings and try again.
6. The computer cannot connect to the internet wirelessly.
Please make sure you can access the Internet when plug in the Ethernet cable from the Wireless
Modem Router to the computer, otherwise, please refer to Question 4. Then check the wireless
connection status on your computer:
• Search available networks and connect to your wireless network. If your wireless network
name (SSID) is not listed in, please connect to Wireless Modem Router’s LAN port by an
Ethernet cable, login Wireless Modem Router’s web management page 192.168.1.1 to make
sure the Broadcast SSID is enabled.
• If you cannot connect to your wireless network, please make sure the password is correct.
You can connect to Wireless Modem Router’s LAN port by an Ethernet cable, login router’s
web management page 192.168.1.1 to double check your password.
• If there is no wireless network found in range on your computer, please make sure the
wireless switch is turned on, and the wireless network adapter is working properly.