User manual

ManualsBrandsPHICOMM Manualscomputers & electronicsENERGY M

REINSTALL BACK COVER

First hold the upper half of the back. Fasten and align it on

the device.

Slide the back cover into the slots provided.

SIM CARD

The SIM card includes your phone number, the service information,

the phone book and the message storage.

Install SIM card

Make sure the phone is off.

With the SIM card’s gold contacts facing down and its cut-off

corner facing out, insert the SIM card into the SIM card slot.

NOTICE:

The phone is dual card dual-standby mobile phone; two

SIM cards can be installed at the same time. The G card (GSM)

only can be installed on the left, and both G card (GSM) or W

card (WCDMA/UMTS) can be installed on the right.

Remove SIM card

Remove the back cover and battery.

Take out the SIM card.

BATTERY

Your device is equipped with a rechargeable lithium-ion battery

and is designed to use only manufacturer-approved batteries and

accessories. Battery performance depends on many factors,

including network configuration, the phone operating room

temperature, selected and used functions and settings, patterns of

24 24

Small

opening

use of sound, data and other applications. The new battery in the

phone is only half charged. Please charge the battery fully before

use.

Insert battery

Align the battery’s exposed copper contacts with the battery

connectors inside the battery compartment.

Insert the contact’s side of the battery first and then gently

push the battery into place.

Close the battery cover.

Remove battery

Make sure the phone is off.

Remove the back cover.

Remove the battery from the small opening on top side of

the battery compartment.

SD CARD

Please install microSD card in your phone to store photos, music

and apps.

The camera and gallery application can only be initiated after the

installation of microSD card.

Install SD card

Insert the microSD card into the slot with its gold contacts facing

down.