User Manual ADSL2/2+ Modem Router FD-221 User Manual / V2.
Copyright Statement PHICOMM is the registered trademark of Shanghai Feixun Communication Co., Ltd. Other trademark or trade name mentioned herein are the trademark or registered trademark of the company. Copyright of the whole product as integration, including its accessories and software, belongs to Shanghai Feixun Communication Co., Ltd. Without the permission of Shanghai Feixun Communication Co., Ltd., individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages.
ADSL2/2+ Modem Router www.phicomm.com CONTENTS Chapter 1: Introduction .............................................. 1 Product Overview ............................................................................................... 1 Main Features ....................................................................................................... 1 Chapter 2: Hardware Installation ................................... 2 Front Panel ........................................................................
www.phicomm.com ADSL2/2+ Modem Router QoS ............................................................................................................................................ 31 VLAN ......................................................................................................................................... 33 ADSL ......................................................................................................................................... 35 Access Management .............
www.phicomm.com ADSL2/2+ Modem Router Chapter 5: Specification ............................................ 49 Appendix A: Troubleshooting ..................................... 50 Appendix B: Certification .......................................... 52 FCC Statement .................................................................................................. 52 CE Mark Warning ............................................................................................. 53 Appendix C: Glossary.........
ADSL2/2+ Modem Router www.phicomm.com Chapter 1: Introduction Product Overview Thank you for choosing PHICOMM FD-221 ADSL2/2+ Modem Router. This product is designed to provide a simple and cost-effective ADSL internet connection for a private Ethernet network. It is connected to network devices via standard Ethernet ports. The ADSL connection is made using ordinary telephone line with standard connectors.
ADSL2/2+ Modem Router www.phicomm.
ADSL2/2+ Modem Router www.phicomm.
ADSL2/2+ Modem Router www.phicomm.com Physical Connection Before installing the device, please make sure your broadband service provided by your ISP is available. If there is any problem, please contact your ISP. You need to connect the device to the phone jack, the power outlet, and your computer or network. Before cable connection, turn off the power supply and keep your hands dry. You can follow the steps below to install it. Step 1: Connect the ADSL Line.
www.phicomm.com ADSL2/2+ Modem Router After the physical connection please check whether the LEDs of the Modem Router display normally as the diagram below describes.
www.phicomm.com ADSL2/2+ Modem Router Chapter 3: Quick Installation Configure Your PC After you directly connect your PC to FD-221 or to a Hub/Switch which has connected to this Modem Router, we suggest you set your computer to obtain the IP address automatically. For Windows XP/2000 1) Click Start > Control Panel.
ADSL2/2+ Modem Router www.phicomm.com 2) Select and double click Network Connections. 3) Right click Local Area Connection and then select Properties.
www.phicomm.com ADSL2/2+ Modem Router 4) Select Internet Protocol (TCP/IP) and click Properties. 5) Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK.
ADSL2/2+ Modem Router www.phicomm.com 6) Run the Ping command in the command prompt to verify the network connection. Click Start menu on your desktop, select Run tab, type cmd in the field.
www.phicomm.com ADSL2/2+ Modem Router 7) Then type ping 192.168.1.1, press Enter. If the screen looks like the following, you have succeeded For Windows Vista/7: 1) Click Start>Control Panel.
www.phicomm.com ADSL2/2+ Modem Router 2) Click Network and Internet. 3) Click Network and Sharing Center.
www.phicomm.com ADSL2/2+ Modem Router 4) Go to Change Adapter Settings (win7)/Manage Network Connections (Vista). 5) Right click Local Area Connection, choose Properties.
ADSL2/2+ Modem Router www.phicomm.com 6) Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. 7) Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. Note: After your computer is configured successfully, go to the next section to configure the Modem Router via web. Otherwise, refer to the question 1 in Troubleshooting section to reset the modem.
ADSL2/2+ Modem Router www.phicomm.com Install Your Modem Router To configure the device, you can either run the Resource CD or the Web based Setup Wizard. For first-time installation we recommend running the Resource CD, follow the step-by-step instructions to finish the installation. After the initial configuration is done, you can login to the Web based Setup Wizard to configure do some additional settings. Here we introduce how to set it up via Web based Setup Wizard.
www.phicomm.com ADSL2/2+ Modem Router Step 4: Click NEXT. Step 5: If you want to change the login password, put in the new password in this page. Otherwise just leave it blank, and then click NEXT. Step 6: Choose your time zone, and then click NEXT.
www.phicomm.com ADSL2/2+ Modem Router Step 7: Choose the connection type provided by your ISP (take PPPoE/PPPoA as an example here), and then click NEXT. Step 8: Put in Username, Password, VPI, VCI and Connection Type provided by your ISP. If you are not sure about the information, please confirm with your ISP. Then click NEXT. Step 9: Click NEXT.
ADSL2/2+ Modem Router www.phicomm.com Step 10: Click CLOSE. Note: Wait a moment, if the configuration is successful, the Internet LED light will finally turn green. The Internet light will not light on if the Modem Router works as bridge, please set up a broadband connection on your computer in that condition.
ADSL2/2+ Modem Router www.phicomm.com Chapter 4: Software Configuration This User Manual recommends using the Quick Installation Guide for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, maybe you will get help from this chapter to configure the advanced settings through the Web based Setup Wizard. After your successful login, you can configure and manage the device.
ADSL2/2+ Modem Router www.phicomm.com Internet ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally setup 8 VCs on different encapsulations, if you apply 8 different virtual circuits from your ISP. You need to activate the VC to take effect. For PVCs management, you can use ATM QoS to setup each PVC traffic priority.
ADSL2/2+ Modem Router www.phicomm.com 1. Dynamic IP Address Select this option if your ISP provides you an IP address automatically. This option is typically used for Cable services. Please enter the Dynamic IP information accordingly. Encapsulation: Select the encapsulation mode for the Dynamic IP Address, you can leave it default. Bridge Interface: Activate the option, and the Router can also work in Bridge mode.
ADSL2/2+ Modem Router www.phicomm.com only accept but will not send RIP packet. OUT only means the ADLS router will only send but will not accept RIP packet. Multicast: Select IGMP version, or disable the function. IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish membership in a multicast group. The ADSL ATU-R supports both IGMP v1 and IGMP v2. Select Disabled to disable this function.
ADSL2/2+ Modem Router www.phicomm.com 3. PPPoA/PPPoE Select this option if you have a username and password to access internet. This option is typically used for DSL services. Select Dynamic to obtain an IP address automatically for your PPP connection. Select Static to use a static IP address for your PPP connection. Please enter the information accordingly. Service name: This is optional, if you don’t have a service name, leave it blank. Username: Enter your username for your PPPoA/PPPoE connection.
ADSL2/2+ Modem Router www.phicomm.com provided by your ISP. For Static IP, you need to specify the IP address, Subnet Mask and Gateway address. NAT: Select this option to Enable/Disable the NAT (Network Address Translation) function for this VC. The NAT function can be activated or deactivated per PVC basis. Default Route: Select Yes to configure the PVC as the default gateway to internet from this device. TCP MTU Option: Enter the TCP MTU as you desire.
ADSL2/2+ Modem Router www.phicomm.com 4. Bridge Mode If you select this type of connection, the modem can be configured to act as a bridging device between your LAN and your ISP. Bridges are devices that enable two or more networks to communicate as if they are two segments of the same physical LAN. Note: After you finish the Internet configuration, please click SAVE to make the settings take effect.
ADSL2/2+ Modem Router www.phicomm.com LAN Router Local IP: These are the IP settings of the LAN interface for the device. These settings may be referred to as private settings. You may change the LAN IP address if necessary. The LAN IP address is private to your internal network and cannot be seen on the Internet. IP Address: Modem Router’s local IP Address, you can access to the Web based Setup Wizard via the IP Address, the default value is 192.168.1.1.
ADSL2/2+ Modem Router www.phicomm.com Starting IP Address: Enter the starting IP address for the DHCP server's IP assignment. Because the default IP address for the Router is 192.168.1.1, the default Start IP Address is 192.168.1.2, and the Start IP Address must be 192.168.1.2 or greater, but smaller than 192.168.1.254. IP Pool Count: The max user pool size. Lease Time: The length of time for the IP lease.
ADSL2/2+ Modem Router www.phicomm.com Click any of them, and you will be able to configure the corresponding function. Firewall Firewall: Select this option can automatically detect and block Denial of Service (DoS) attacks, such as Ping of Death, SYN Flood, Port Scan and Land Attack. SPI: If you enable SPI, all traffics initiated from WAN would be blocked, including DMZ, Virtual Server, and ACL WAN side. Routing Click ADD ROUTE button to add a new route on the next screen.
ADSL2/2+ Modem Router www.phicomm.com IP Subnet Mask: Enter the subnet mask for this destination. Gateway IP Address: Enter the IP address of the gateway. The gateway is an immediate neighbor of your Modem Router that will forward the packet to the destination. On the LAN, the gateway must be a router on the same segment as your Router; over Internet, the gateway must be the IP address of one of the remote nodes. Metric: Metric represents the cost of transmission for routing purposes.
ADSL2/2+ Modem Router www.phicomm.com DMZ A DMZ (demilitarized zone) is a host between a private local network and the outside public network. It allows outside users to access to a server that has company data directly. Users of the public network outside the company can access to the DMZ host. Please assign a static IP address to the destination computer before you use this feature. DMZ Host IP Address: Enter the specified IP Address for DMZ host on the LAN side.
ADSL2/2+ Modem Router www.phicomm.com Rule Index: The Virtual Server rule index for this VC. You can specify 10 rules maximally. All the VCs with single IP will use the same Virtual Server rules. Application: The Virtual Servers can be used for setting up public services on your LAN. Protocol: The protocol used for this application. Start & End Port Number: Enter the specific Start and End Port number you want to forward.
ADSL2/2+ Modem Router www.phicomm.com Rule Type: There are four types: One-to-One, Many-to-One, Many-to-Many Overload and Many-to-Many No-overload. Local Start & End IP: Enter the local IP Address you plan to map. Local Start IP is the starting local IP address and Local End IP is the ending local IP address. If the rule is for all local IPs, then the Start IP is 0.0.0.0 and the End IP is 255.255.255.255. Public Start & End IP: Enter the public IP Address you want to do NAT.
ADSL2/2+ Modem Router www.phicomm.com Active: You can activate or deactivate this function, the rule can take effect only when it is activated. Application: Select the application that the rule aimed at. Physical Ports: Select the port whose traffic flow are controlled by the rule. Destination MAC & IP & Mask & Port Range: Enter the IP information about the Destination host for the rule. Source MAC & IP & Mask & Port Range: Enter the IP information about the Source host for the rule.
www.phicomm.com ADSL2/2+ Modem Router VLAN Virtual LAN (VLAN) is a group of devices on one or more LANs that are configured so that they can communicate as if they were attached to the same LAN, when in fact they are located on a number of different LAN segments. Because VLANs are based on logical instead of physical connections, it is very flexible for user/host management, bandwidth allocation and resource. Assign VLAN PVID for each Interface.
ADSL2/2+ Modem Router www.phicomm.com Define VLAN Group VLAN Index: Select the VLAN index for this VC. You can specify 8 groups maximum. VLAN ID: This indicates the VLAN group. ATM VCs: Select the ATM VCs as members of VLAN, and if you leave the Tagged blank, the tag in frames will be deleted when transmitted from the VC. Ethernet & USB: Select the Ethernet or USB port as a member of VLAN. VLAN Group Summary: This displays the information about the VLAN Groups.
ADSL2/2+ Modem Router www.phicomm.com ADSL The ADSL feature can be selected when you meet the physical connection problem. Please check the proper settings with your Internet service provider. ADSL Mode: Select the ADSL operation mode which your ADSL connection uses. ADSL Type: Select the ADSL operation type which your ADSL connection uses. Access Management Click any of them, and you will be able to configure the corresponding function.
ADSL2/2+ Modem Router www.phicomm.com ACL You can specify the client to access the ADSL Router once setting his IP as a Secure IP Address through selected applications. ACL: If Activated, the IP addresses which are contained in the Access Control List can access the Modem. If Deactivated, all IP addresses can access the Modem. ACL Rule Index: Select the ACL rule index for the entry. Active: Enable the ACL rule.
ADSL2/2+ Modem Router www.phicomm.com Filter The filtering feature includes IP/MAC Filter, Application Filter and URL Filter. The feature makes it possible for administrators to control user's access the Internet, protect the networks. Filter Type Selection: Select the filter type for the configuration below. IP/MAC Filter Rule Index: Select the Set index for the IP Filter entry. This index can match with sixteen IP / MAC Filter Rule Indexes. Interface: Select the interface for the entry.
www.phicomm.com ADSL2/2+ Modem Router Protocol: TCP, UDP or ICMP in the drop-down list for the connection between the Source IP address and Destination IP address. Rule Unmatched: If the rule is mismatch you can choose to execute the next one or stop the performance. IP/MAC Filter Listing: This displays the information about the IP Filter rules. SNMP The SNMP (Simple Network Management Protocol) is used to exchange information between network devices.
ADSL2/2+ Modem Router www.phicomm.com automatically configure network addressing, announce their presence in the network to other UPnP devices and enable exchange of simple product and service descriptions. DDNS The router offers a Dynamic Domain Name System (DDNS) feature. The feature lets you use a static host name with a dynamic IP address. User should type the host name, user name and password assigned to your Modem Router by your Dynamic DNS provider.
ADSL2/2+ Modem Router www.phicomm.com CWMP The function supports TR-069 protocol which collects information, diagnoses the devices and configures the devices automatically via ACS (Auto-Configuration Server). CWMP: Select Activated to activate the CWMP function. URL: Enter the website of ACS which is provided by your ISP. User Name/Password: Enter the User Name and password to login the ACS server. Path: Enter the path that connects to the ACS server.
ADSL2/2+ Modem Router www.phicomm.com Administration Note: There is only one account that can access web management interface. The default account is admin, and the password is admin. Admin has read/write access privilege. When you change the password, you should enter the new password twice, and then click SAVE to make the new password take effect. Time Zone The system time is the time used by the device for scheduling services. There are three methods to configure the time.
ADSL2/2+ Modem Router www.phicomm.com NTP Server address manually, and then the Router will get the time from the specific Server firstly. PC’s Clock Select PC’s Clock as the synchronize time, you don’t need to set any items. Manually Select Manually as the synchronize time, you need to set the date and time corresponding to the current time.
ADSL2/2+ Modem Router www.phicomm.com Firmware Make sure the firmware or romfile you want to use is on the local hard drive of the computer. Click Browse to find the local hard drive and locate the firmware or romfile to be used for upgrade. To upgrade the router's firmware: Step 1: Download a more recent firmware upgrade file. Step 2: Type the path and file name of the update file into the ‘New Firmware Location’ field. Or click Browse to locate the update file. Step 3: Click UPGRADE.
www.phicomm.com ADSL2/2+ Modem Router To back up the Modem Router’s current settings: Step 1: Click the ROMFILE SAVE button, you can see: Step 2: Click Save to save the file as the appointed file. SysRestart You can choose restart the device with current settings or restore to factory default settings.
www.phicomm.com ADSL2/2+ Modem Router Diagnostics You can view the test results for the connectivity of the physical layer and protocol layer for both LAN and WAN sides on the screen. Status Choose Status, you can see these submenus: Device Info, System Log and Statistics. Click any of them, and you will be able to configure the corresponding function.
www.phicomm.com ADSL2/2+ Modem Router Device Info You are able to view the device information, including LAN, WAN and ADSL. The information will vary depending on the settings of the Router configured on the Interface Setup screen.
ADSL2/2+ Modem Router www.phicomm.com System Log You can check the System Log of the Modem Router in this page. Statistics Interface: You can select Ethernet and ADSL to view the corresponding network traffic over different ports.
www.phicomm.com ADSL2/2+ Modem Router Help In this page, you can view the help information for configuration of any function. Note: Click the tab, and you will be able to get the corresponding information.
ADSL2/2+ Modem Router www.phicomm.com Chapter 5: Specification Basic IEEE Standards IEEE802.3, IEEE802.3u Interfaces 1 x RJ11 DSL Port, 1 x RJ45 LAN Port LED Indicators Power, LAN, DSL, Internet Data Rate Downstream: Up to 24Mbps Upstream: Up to 1Mbps Security NAT and SPI Firewall, Packet Filter VPN Pass Through IPSec/PPTP/L2TP Pass-through QoS IP Type of service(ToS), 802.
ADSL2/2+ Modem Router www.phicomm.com Appendix A: Troubleshooting 1. How do I restore my Modem Router’s configuration to factory default settings? With the router powered on, press the Reset button on the rear panel, keep holding it for about 5 seconds then release it. 2. Why I cannot login the Modem Router’s web management page? • Make sure the computer goes into the LAN port of the router.
ADSL2/2+ Modem Router www.phicomm.com the VPI/VCI, Connection Type, username and password are correct. If there are any mistakes, please correct the settings and try again. 6. How to configure PPPoE connection on Mac? Step 1: Click the Apple menu then select System Preferences. Step2: When the System Preferences screen appears, please go to the Internet &Wireless section and click Network. Step 3: Under the Network screen, please select Ethernet.
ADSL2/2+ Modem Router www.phicomm.com Appendix B: Certification FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ADSL2/2+ Modem Router www.phicomm.com CE Mark Warning Marking with the above symbol indicates compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC. This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
ADSL2/2+ Modem Router www.phicomm.com Appendix C: Glossary ATM (Asynchronous Transfer Mode): ATM is a cell based transfer mode that requires variable length user information to be segmented and reassembled to/from short, fixed length cells. It uses two different methods for carrying connectionless network interconnect traffic, routed and bridged Protocol Data Units (PDUs), over an ATM network.
ADSL2/2+ Modem Router www.phicomm.com VCI (Virtual Channel Identifier): The identifier of the VC contained in the ATM cell header. VPI (Virtual Path Identifier): The identifier of the VP contained in the ATM cell header. VLAN (Virtual Local Air Network): Logical subgroups that constitute a Local Area Network (LAN). This is done in software rather than defining a hardware solution.
Shanghai Feixun Communication Co., Ltd. E-mail: support@phicomm.com Website: www.phicomm.com Copyright © 2011 Shanghai Feixun Communication Co., Ltd. All rights reserved.
