Operation Manual

ADSL2/2+ Modem Router
www.phicomm.com
2
Chapter 2: Hardware Installation
Chapter 2: Hardware Installation
Front Panel
The front panel of the ADSL2/2+ Modem Router includes one power indicator and three
function indicators, as explained in table below:
LED Status Description
Power
On Power is on
Off Power is off
LAN
On There is a successful connection on the Ethernet port
Off There is no connection on the Ethernet port or the connection is abnormal
Blinking Data is being transferred over the Ethernet port
USB
On There is a successful connection on USB port but no activity
Off There is no connection on USB port or the connection is abnormal
Blinking Data is being transferred over the USB connection
DSL
On The Modem Router is synchronized
Blinking The Modem Router is synchronizing
Internet
Green A successful PPP connection has been built
Off The DSL port is linked down or the Modem Router works in Bridge mode
Red The PPP connection failed to be established