Operation Manual

Copyright @ 2014 Phicomm Europe GmbH – print only for private use!
page 5 of 49
SAFETY PRECAUTIONS FOR RADIO FREQUENCY EXPOSURE
• Avoid using your device near metal structures (e. g. the steel frame of a building).
• Avoid using the device near strong electromagnetic sources, such as microwave
ovens, sound speakers, TV and radio.
• Use only original manufacturer-approved accessories.
• Use of non-original manufacturer-approved accessories may violate your local RF
exposure guidelines and should be avoided.
INTERFERENCES WITH MEDICAL EQUIPMENT FUNCTIONS
This product may cause medical equipment to malfunction. The use of this device is
forbidden in most hospitals and medical clinics.
If you use any other personal medical device, consult the manufacturer of your device to
determine if they are adequately shielded from external RF energy.
HEARING AID DEVICES
Some devices may interfere with some hearing aid devices. In the event of such
interference, you may want to consult your service provider, or call customer service line
to discuss alternatives.
NON-IONIZING RADIATION
Your device has external antennas. This product should be operated in its normal-use
position to ensure the radiative performance and safety of the interference. Users are
advised that for satisfactory operation of the equipment and for the safety of personnel,
it is recommended that no part of the human body be allowed to come too close to the
antenna during operation of the equipment.
Use only the supplied antennas. Use of unauthorized or modified antennas may impair
transfer quality and damage the device, causing loss of performance and SAR levels
exceeding the recommended limits as well as result in noncompliance with local
regulatory requirements in your country.
To assure optimal device performance and ensure human exposure to RF energy is
within the guidelines set forth in the relevant standards, always use your device only its
normal-use position. Contact with the antennas may impair quality and cause your
device to operate at a higher power level than needed. Avoiding contact with the
antenna area when the device is in use optimizes the antenna performance.