Operation Manual

150Mbps Wireless N Access Point
www.phicomm.com
23
Chapter 4: Software Configuration
wireless station's capability and request.
You can select ASCII or Hex format. ASCII Format stands for any combination of keyboard
characters in the specified length. Hex format stands for any combination of hexadecimal digits
(0-9, a-f, A-F) in the specified length.
You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, and null key is not
permitted) or 5 ASCII characters. Or enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F,
and null key is not permitted) or 13 ASCII characters. Or enter 32 hexadecimal digits (any
combination of 0-9, a-f, A-F, and null key is not permitted) or 16 ASCII characters.
Mode 3: Security Mode > WPA-Personal, WPA2-Personal, WPA- Personal/ WPA2-Personal
WPA-Personal: Pre-shared key of WPA.
WPA2-Personal: Pre-shared key of WPA2.
WPA- Personal/ WPA2-Personal: Select WPA-Personal or WPA2-Personal automatically based on
the wireless station's capability and request.
Encryption: You can select TKIP, AES or TKIP+AES.
Password: The password should be between 8 and 63 characters.
Note: You can set different wireless security for each SSID if you have enabled multiple SSIDs.
LAN
MAC Address: The physical address of the router.
IP Address: The LAN IP Address of the router.
Subnet Mask: The Subnet Mask associated with the LAN IP Address.