Operation Manual

150Mbps Wireless N Access Point

www.phicomm.com

Appendix A: Troubleshooting

1. How do I restore the Wireless Access Point to factory default settings?

When the Wireless Access Point is powered on, press and hold the reset button on the rear

panel for 8~10 seconds, after all the lights start flashing, release it.

2. What can I do if I forget my password?

 Restore the wireless Access Point to factory default settings. If you do not know how to do it,

please refer to the answer for question 1.

 Use the default username and password: admin, admin.

 Reconfigure the wireless Access Point since you have ever reset it.

3. I cannot login the web management page.

 Check the computer’s IP address, make sure the IP address is correct, for details please refer

to the section of Configure the Computers IP Address in this manual.

 Make sure you put 192.168.0.254 into the address bar, not the search bar.

 Check your web browser, make sure the Proxy server is unchecked. Take Internet Explorer as

an example, go to Tools>Internet Options>Connections>LAN Settings, uncheck Use a

proxy server for your LAN.

 If it tells you the username or password is error, and you cannot remember the new one,

please reset router by pressing reset button for at least 6 seconds, and then try to login with

default username and password (admin/admin).