Operation Manual

150Mbps Wireless N Access Point
www.phicomm.com
3
Chapter 1: Introduction
Interface/Button Function
ON/OFF Used to power on or power off the wireless Access Point
PWR Connect with a power adapter
LAN Connect to your network devices
Reset Used to restore the product to factory default settings
WPS Used to create a secured wireless network automatically by pressing the WPS button
Main Features
Complies with IEEE 802.11n to provide a wireless data rate of up to 150Mbps
Supports 1 RJ45 LAN port which also allows Power over Ethernet (PoE)
Provides multiple encryption security Types including: 64/128-bit WEP, WPA/WPA2-personal
Easily setup a WPA2 encrypted secure connection at a push of the WPS button
Wireless MAC address filtering allows you to control the access rights of the wireless clients
according to the MAC addresses
Supports built-in DHCP server
Supports operation modes including: AP, Client, Bridge, Bridge with AP, and Repeater
Supports Multiple SSID
Firmware upgrade allows you to update the firmware to the latest version through the
configuration page
External detachable antenna allows better alignment and stronger antenna upgrade