User Manual 300Mbps Wireless N USB Adapter FWN-750N User Manual / V2.
Copyright Statement PHICOMM is the registered trademark of Shanghai Feixun Communication Co., Ltd. Other trademark or trade name mentioned herein are the trademark or registered trademark of the company. Copyright of the whole product as integration, including its accessories and software, belongs to Shanghai Feixun Communication Co., Ltd. Without the permission of Shanghai Feixun Communication Co., Ltd., individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages.
00Mbps Wireless N USB Adapter www.phicomm.com CONTENTS Chapter 1: Introduction .............................................. 1 Product Overview ............................................................................................... 1 Main Features ....................................................................................................... 1 Chapter 2: Installation ................................................ 2 Driver Installation ...................................................
www.phicomm.com 300Mbps Wireless N USB Adapter Chapter 4: Specification ............................................ 14 Appendix A: Troubleshooting ..................................... 15 Appendix B: Certification .......................................... 17 FCC Statement .................................................................................................. 17 CE Mark Warning .............................................................................................
300Mbps Wireless N USB Adapter www.phicomm.com Chapter 1: Introduction Product Overview Thank you for choosing FWN-750N wireless N USB adapter. FWN-750N allows users to connect desktop or notebook computer to the internet anywhere in your house without the hassle of messy wires. Designed with high performance wireless N technology for better signal and coverage, the adapter is ideal for you to watch movies, transfer photos, and download music from your couch, home office or the backyard with ease.
300Mbps Wireless N USB Adapter www.phicomm.com Chapter 2: Installation Driver Installation Note: DO NOT plug the USB Adapter into your computer before installing the driver from CD-ROM. Please download the driver from our website www.phicomm.com if your computer is not equipped with CD driver. 1) Insert the enclosed CD into your computer, the Setup Wizard will pop up on the screen automatically. Or please click My computer – CD-ROM drive ( Autorun.exe).
300Mbps Wireless N USB Adapter www.phicomm.com 3) The computer will reboot automatically at the end of installation, it is time to plug the wireless adapter into your computer. A wireless icon an adapter shortcut will appear in your taskbar, and will show in your desktop. Network Connection 1) Double click the adapter shortcut, a utility page will pop up. Click Available Network, the available networks are listed in the table, choose the network that you would like to connect, and click Add to Profile.
300Mbps Wireless N USB Adapter www.phicomm.com 2) Input the Network Key of your wireless network, click OK. 3) Wait a few minutes till the wireless network connection succeed, the following page will appear. Click Close to complete the configuration. 4) The wireless icon in the taskbar will display as follow: Green bars show the quality of wireless signal, . means no signal while means full signal.
300Mbps Wireless N USB Adapter www.phicomm.com Chapter 3: Configuration The Phicomm Adapter Utility is used to configure the Adapter. The Utility lets you search for available wireless networks, establish or terminate a connection with a wireless network, and save a wireless network’s settings. There are two client utility applications in FWN-750N: Station mode and Access Point mode. Note: In this utility interface, Station Mode is the default access way.
300Mbps Wireless N USB Adapter www.phicomm.com General In the General tab, it displays general information of the being-used wireless network, including status, speed, authentication type, encryption type, SSID, signal strength and quality, network address. Renew IP: Click to renew the general information of the being-used wireless network. Show Tray Icon: Select this option, will display on the taskbar; otherwise, no icon will be shown.
www.phicomm.com 300Mbps Wireless N USB Adapter Profile Profile tab shows the profile of different networks that you have added or used. You could select any of them and operate as add, remove, edit, duplicate and set default. Available Network The Available Network is used to scan available wireless networks around, providing the information such as network name (SSID), channel, encryption type, authentication, signal strength etc. of each network for your reference.
www.phicomm.com 300Mbps Wireless N USB Adapter Refresh: Click to rescan available wireless networks around. Add to Profile: Choose one of the networks that you would like to connect and click this button to continue. Status Status tab displays wireless network status including manufacturer, driver version etc. Statistics Statistics summarize receiving (R) and transmitting (T) statistical information of the adapter. Reset: click to renew the statistics.
www.phicomm.com 300Mbps Wireless N USB Adapter Wi-Fi Protected Setup There are three ways to connect to a wireless network by WPS function: Note: Wi-Fi Protected Setup is enabled only with WPS-compliant devices. PIN Input Config (PIN) It is a method to connect to the network by inputting PIN (Personal Identification Number) code which was shown in the page into your router’s utility page. Operation as below: 1) Click PIN Input Config (PIN) button, the following page will pop up, click No.
www.phicomm.com 300Mbps Wireless N USB Adapter 3) Access the web-based utility of the router (refer to the router’s documentation for instructions), and input PIN Code (e.g. 92596061), click Save. 4) Wait two minutes, the adapter will connect to the router automatically. The WPS-PIN method configuration is complete. Push Button Config (PBC) It is a method to connect to the network by pressing WPS button on the wireless device.
300Mbps Wireless N USB Adapter www.phicomm.com Click Mode – Access Point. The tray icon will turn from to .
www.phicomm.com 300Mbps Wireless N USB Adapter General Click Config to set its AP information such as network name (SSID), network key, channel, authentication type and encryption type. Click OK to save the settings. Advanced In this page, you could do the advanced settings such as beacon interval, DTIM period and preamble mode.
www.phicomm.com 300Mbps Wireless N USB Adapter Set Defaults: Click to restore to the factory default setting. Apply: Click to save your own setting. Note: DO NOT change this unless you have special requirements. Statistics Statistics summarize receiving (R) and transmitting (T) statistical information of the adapter. Reset: click to renew the statistics. ICS (Internet Connection Sharing) Choose one of the connections and click Apply to apply the connection.
300Mbps Wireless N USB Adapter www.phicomm.com Chapter 4: Specification Product Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, CSMA/CA with ACK Interface USB 2.0 11n: 300Mbps Data Rate 11g: 54Mbps 11b: 11Mbps Frequency Range 2.4-2.
www.phicomm.com 300Mbps Wireless N USB Adapter Appendix A: Troubleshooting 1. How do I know if my adapter is installed properly? Right click on My Computer icon on your desktop screen, and then choose Manage. Expand Network Adapters, you can see PHICOMM Wireless LAN802.11n USB 2.0 Network Adapter, right click on it, and choose Properties.
www.phicomm.com 300Mbps Wireless N USB Adapter Look under Device Status to check that the device is working properly. 2. The computer does not recognize the wireless network Adapter. Make sure that the Wireless Network Adapter is properly seated in the computer’s USB port. If Windows does not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that were previously loaded. 3. Cannot connect to any access points.
300Mbps Wireless N USB Adapter www.phicomm.com Appendix B: Certification FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
300Mbps Wireless N USB Adapter www.phicomm.com CE Mark Warning Marking with the above symbol indicates compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
300Mbps Wireless N USB Adapter www.phicomm.com Appendix C: Glossary WLAN: Wireless Local Area Network. 802.11: A family of specifications developed by the IEEE for WLAN technology. 802.11a: An extension to 802.11 WLAN standard that provides up to 54 Mbps transmission in the 5 GHz UNI radio band. 802.11b: An extension to 802.11 WLAN standard that provides up to 11 Mbps transmission in the 2.4 GHz ISM radio band. 802.11b uses DSSS modulation. 802.11g: An extension to 802.
Shanghai Feixun Communication Co., Ltd. E-mail: support@phicomm.com Website: www.phicomm.com Copyright © 2011 Shanghai Feixun Communication Co., Ltd. All rights reserved.
