User Manual 150Mbps Wireless N Router FWR-624ND User Manual / V2.
Copyright Statement PHICOMM is the registered trademark of Shanghai Feixun Communication Co., Ltd. Other trademark or trade name mentioned herein are the trademark or registered trademark of the company. Copyright of the whole product as integration, including its accessories and software, belongs to Shanghai Feixun Communication Co., Ltd. Without the permission of Shanghai Feixun Communication Co., Ltd., individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages.
150Mbps Wireless N Router www.phicomm.com CONTENTS Chapter 1: Introduction .............................................. 1 Product Overview ............................................................................................. 1 Main Features..................................................................................................... 4 Chapter 2: Installation ................................................ 5 Physical Connection .............................................................
www.phicomm.com 150Mbps Wireless N Router Wireless Clients List ............................................................................................................. 28 WPS Settings.......................................................................................................................... 29 WDS Settings ......................................................................................................................... 30 DHCP Server ............................................
www.phicomm.com 150Mbps Wireless N Router Routing Settings .............................................................................................41 Static Routing Table............................................................................................................ 42 Dynamic Routing Settings................................................................................................ 42 IP Bandwidth Control .............................................................................
www.phicomm.com 150Mbps Wireless N Router Appendix C: Glossary................................................
150Mbps Wireless N Router www.phicomm.com Chapter 1: Introduction Product Overview Thank you for choosing FWR-624ND Wireless N Router. FWR-624ND 150Mbps Wireless N Router is an all-in-one router, ideal for home and SOHO users to share broadband Internet connection over the wired and wireless network. With the speed of up to 150Mbps, it can provide users with extraordinary smooth internet surfing, internet phone calling, and on-line gaming.
150Mbps Wireless N Router www.phicomm.com complete, the LED is continuously lit. WLAN LED: The Wireless LED lights up when the wireless feature is enabled. It flashes when the Router sends or receives data over the wireless network. WPS (Wi-Fi Protected Setup) LED: If you have client devices (such as wireless adapters) that support Wi-Fi Protected Setup, then you can use the Wi-Fi Protected Setup button to automatically configure wireless security for your wireless network.
150Mbps Wireless N Router www.phicomm.com Rear Panel ON/OFF: The power on/off button. Power: The Power port connects to the included power adapter. LAN (1~4): Using Ethernet cables, these Ethernet ports (4, 3, 2, 1) connect the Router to computers and other Ethernet network devices on your wired network.
150Mbps Wireless N Router www.phicomm.
150Mbps Wireless N Router www.phicomm.com Chapter 2: Installation Physical Connection Note: • Actual product may be different as the picture, but the installation will be the same. • Please use the included power adapter. Use of a different power adapter could cause damage and void the warranty for this product. • Please ensure the Power, WLAN, LAN and WAN lights are ON when the installation finished successfully.
www.phicomm.com 150Mbps Wireless N Router Configure the Computer’s IP Address After connecting your PC to the router, you need to configure your PC’s IP address. For Windows XP/2000 1) Click Start > Control Panel. 2) Select and double click Network Connections.
www.phicomm.com 150Mbps Wireless N Router 3) Right click Local Area Connection and then select Properties. 4) Select Internet Protocol (TCP/IP) and click Properties.
www.phicomm.com 150Mbps Wireless N Router 5) Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. For Windows Vista/7 1) Click Start>Control Panel.
www.phicomm.com 150Mbps Wireless N Router 2) Click Network and Internet. 3) Click Network and Sharing Center.
www.phicomm.com 150Mbps Wireless N Router 4) Go to Change Adapter Settings (win7)/Manage Network Connections (Vista). 5) Right click Local Area Connection, choose Properties.
150Mbps Wireless N Router www.phicomm.com 6) Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. 7) Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK.
150Mbps Wireless N Router www.phicomm.com Setup Wizard After successful installation, you can go ahead with connecting to the internet, the operations are as follow: 1) Open your web browser, in the address bar, type in 192.168.0.1 2) You are prompt to enter the Username/Password (preset as admin/admin) which you can found on the label at the bottom of your router, and then click Login.
150Mbps Wireless N Router www.phicomm.com a. Select Static IP if your ISP gives you the Static IP Address, Subnet Mask, Default Gateway and DNS Server Address, type in those information and then click Next. b. Select Dynamic (DHCP) if your ISP does not gives you any IP numbers to use. This option is commonly used for cable modem services. Router will obtain IP address information automatically. In this case, no need to input anything but click Next. c.
www.phicomm.com 150Mbps Wireless N Router d. Select L2TP/Russia L2TP if your ISP provides L2TP/Russia L2TP connection, and then click Next. e. Select PPTP/Russia PPTP if your ISP provides PPTP/Russia PPTP connection, and then click Next. 5) In this page, the SSID is the name of your wireless network, you can give it a different name.
www.phicomm.com 150Mbps Wireless N Router Chapter 3: Router Configuration You can see there are twelve main menus on the left side of the router’s web management page. On the right side, you can see a small HELP button, there are the corresponding explanations and instructions. The Running Status page shows the current status of the Router. Network Settings The Network Settings section helps you to configure the Router to access the Internet.
150Mbps Wireless N Router www.phicomm.com WAN 1. If your ISP is running a DHCP Server, please choose Dynamic IP as your connection type, the Router will automatically get IP parameters from your ISP. WAN Connection Type: To make sure the connection type your ISP provides, please refer to the ISP for more information. MTU Size (byte): The default MTU (Maximum Transmission Unit) value is 1500 Bytes. Sometimes you need to modify the MTU required by your ISP.
150Mbps Wireless N Router www.phicomm.com Secondary DNS Server: Enter the secondary DNS address provided by your ISP. 3. If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE as your WAN Connection Type. Username/Password: Enter the username and password provided by your ISP. These fields are case-sensitive.
150Mbps Wireless N Router www.phicomm.com Scheduled: The connection will only be established in a specified period. 4. If your ISP provides L2TP connection, select L2TP/ Russia L2TP as your WAN Connection Type. Username/Password: Enter the username and password provided by your ISP. These fields are case-sensitive. Dynamic IP/Static IP: Choose either as you are given by your ISP. MTU Size (byte): The default MTU (Maximum Transmission Unit) value is 1460 Bytes.
150Mbps Wireless N Router www.phicomm.com LAN MAC Address: The physical address of the router. IP Address: The LAN IP Address of the router. Subnet Mask: The Subnet Mask associated with the LAN IP Address. Note: If you changed the LAN IP Address of the router, please log in this web management page by the new IP address. MAC Address Clone Some ISPs require you to register the MAC Address of your computer.
www.phicomm.com 150Mbps Wireless N Router Dynamic DNS lets you assign a fixed host and domain name to a dynamic Internet IP address. If you want to use this feature, please register for this service with DDNS service providers such as www.no-ip.com first. If you have registered with a DDNS service provider, select the website of your service provider, then enter the Username, Password and Dynamic DNS service address for your DDNS account.
150Mbps Wireless N Router www.phicomm.com Wireless Settings There are seven submenus under the wireless menu: Wireless Basic Settings, Wireless Security Settings, Wireless MAC Address Filter, Advanced Wireless Settings, Wireless Clients List, WPS Settings and WDS Settings. Click any of them, you will be able to configure the corresponding function.
150Mbps Wireless N Router www.phicomm.com Wireless Mode: If all of the wireless devices connected with this wireless router are in the same transmission mode (eg. 802.11b), you can choose "Only" mode (eg. 11b only). If you have some devices which use a different transmission mode, choose the appropriate "Mixed" mode. Channel: The router can choose the best channel automatically in most cases.
150Mbps Wireless N Router www.phicomm.com Click Best Channel Button, it can help you choose the best channel. Wireless Security Settings You can configure the security of your wireless network(s) in this page. There are six wireless security modes supported by this router: Open, Shared, WEPAUTO, WPA-Personal, WPA2-Personal, and WPA- Personal / WPA2-Personal.
150Mbps Wireless N Router www.phicomm.com Wireless Network Name (SSID): Select the SSID which you want to enable the security. Security Mode: You can choose Disable, Open, Shared, WEPAUTO, WPA-Personal, WPA2-Personal, WPA- Personal/ WPA2-Personal. Mode 1: Security Mode > Disable If you do not want to use wireless security, highlight on this option.
150Mbps Wireless N Router www.phicomm.com Mode 3: Security Mode > WPA-Personal, WPA2-Personal, WPA- Personal/ WPA2-Personal You can select one of following versions: WPA-Personal: Pre-shared key of WPA. WPA2-Personal: Pre-shared key of WPA2. WPA- Personal/ WPA2-Personal: Select WPA-Personal or WPA2-Personal automatically based on the wireless station's capability and request. Encryption: You can select TKIP, AES or TKIP+AES. Password: The password should be between 8 and 63 characters.
www.phicomm.com 150Mbps Wireless N Router Click Apply button. If you want MAC address (00:0A:EB:00:07:5F) cannot access the Wireless Network while others can: Step1: click Add button. Step2: chooses Reject in the Policy. Step3: Fill in MAC address 00:0A:EB:00:07:5F, Click Apply button.
150Mbps Wireless N Router www.phicomm.com Advanced Wireless Settings This section is to configure the advanced wireless setting of the Router, if you are not familiar with the setting items in this page, it’s strongly recommended to keep the provided default values, otherwise it may result in lower wireless network performance. Beacon Interval: The interval for sending packets of the Beacon frame. Its value range is 20-1000 in unit of ms. The default is 100.
150Mbps Wireless N Router www.phicomm.com Click WMM Configuration button, you can see this page: Wireless Clients List Click Refresh button to check the wireless clients.
www.phicomm.com 150Mbps Wireless N Router WPS Settings The WPS function can help you add a new device to the network quickly. If the client device supports Wi-Fi Protected Setup and is equipped with a WPS button, you can add it to the network by pressing the WPS button on the device and then press the button on the router within two minutes.
www.phicomm.com 150Mbps Wireless N Router PIN: If this option is enabled, you need to enter a wireless clients PIN code in the blank and keep the same code in the client. WDS Settings The WDS function can help you extend the wireless range, it supports Bridge Mode and Repeater Mode. Bridge Mode: You can wirelessly connect two or more wired networks via this mode.
www.phicomm.com 150Mbps Wireless N Router Here take bridge mode as an example: Security Mode: You can select WEP 64/128bits mode, WPA-PSK (TKIP) or WPA2-PSK (AES). Password: Enter the key, the key format is decided by the encryption method you selected. Wireless Access Node MAC Address: Input the MAC address of the other wireless router. Note: Two wireless routers must use the same channel, encryption type and encryption key.
150Mbps Wireless N Router www.phicomm.com DHCP If you enable DHCP server of the router, the DHCP server automatically configures the TCP/IP protocol for each computer in the LAN. DHCP Server: If you disable the server, please make sure you have another DHCP server in your network. Start IP Address: The first address in the IP Address pool. End IP Address: The last address in the IP Address pool. Lease Time: It is the time interval that server will change to use another DHCP address.
www.phicomm.com 150Mbps Wireless N Router Address Reservation When you specify a reserved IP address for a PC in the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses could be assigned to servers that require permanent IP settings. IP Address: The IP address that the Router reserved. MAC Address: The MAC Address of the PC that you want to reserve for an IP address. Click Add button, you can set the rules.
150Mbps Wireless N Router www.phicomm.com Choose Enabled, Then click Add button. Rule’s Name: You can give this rule a name. Server IP Address: The LAN IP address of the server you want to open the port, it is like 192.168.0.X. if you click Search IP Address button, you can see this page: Server Port Range: The port range of the server you want to open the port. Protocol: The protocol of the server. Note: Please assign a static IP address to the server.
150Mbps Wireless N Router www.phicomm.com Click Add button. Application Name: Describe the name of the application that being set. Please select one of the applications: There are few common applications available such as Dailpad, MSN gaming, PC Phone etc. the blank will be automatically filled once been chosen. Customize Application Name: If the application you want to add is not included, enter the blank manually. Start/End Trigger Port: The port for outgoing traffic.
150Mbps Wireless N Router www.phicomm.com Choose Enable DMZ, DMZ Status: you can enable or disable the DMZ. IP Address of the DMZ Host: Enter the IP address of the computer in the LAN that you want to set to a DMZ host in the DMZ Host IP Address field. Note: • Before using DMZ Host, you should assign a static IP address to the designated server, and then enter this static IP address into router as the Server IP Address.
150Mbps Wireless N Router www.phicomm.com Group IP: The IP Address of the Multicast Forwarding Group. Host IP: The IP Address of the Group members. Port: The port number of the Multicast group. Status: The status of the Multicast group. Security Options There are four submenus under the Security Options menu: Security Settings, Advanced Security Settings, Local Web Management and Remote Web Management. Click any of them, and you will be able to configure the corresponding function.
150Mbps Wireless N Router www.phicomm.com Common Service Port drop-down list contains some common service ports. You can select one and click Add to add the service port to the virtual server list. Advanced Security Settings Anti DoS Attack: Check to enable it for attack prevention. IGMP-Flood Packet Threshold: If the number of ICMP data packets exceeds the threshold, the defense measures act immediately. Enable filtering UDP-FLOOD attack: Select it if you want to protect against UDP-FLOOD attacks.
150Mbps Wireless N Router www.phicomm.com management page, and add MAC addresses to the list, only MAC addresses in the list can access the web management page of the router, while other computers in the LAN are blocked from accessing the router. MAC Address 1/2/3/4: Enter the MAC addresses of LAN computers. Remote Web Management This section is to allow the network administrator to manage the Router remotely.
150Mbps Wireless N Router www.phicomm.com set at least one filtering condition. You may also set multiple conditions or all the conditions. Enable the MAC/IP/Port Filter function, click Save button. Click Add button, Here take MAC Filter as an example: If you want a computer which MAC address is 00:0A:EB:00:07:5F cannot get online from 4a.m. to 8a.m. on Monday, please follow these steps: Step1: Enter 00:0A:EB:00:07:5F in the Mac Address field. Step 2: Uncheck All, then check Monday in the Schedule.
www.phicomm.com 150Mbps Wireless N Router Note: Please synchronize the routers time first when selecting the timing function. Web URL Filter URL: Put in the URL you want to filter. Routing Settings There are two submenus under the Routing Settings menu: Static Routing Table and Dynamic Routing Settings. Click any of them, and you will be able to configure the corresponding function.
150Mbps Wireless N Router www.phicomm.com Static Routing Table Static routes give the router information that it cannot learn automatically through other means Use the Static Routing page to add or delete a route. The max number is 10. Destination: This is the IP address of the network or host that you want to assign to a static route. Subnet Mask: The Subnet Mask determines which portion of an IP address is the network portion, and which portion is the host portion.
150Mbps Wireless N Router www.phicomm.com Rip Version: Choose the version of RIP. Authentication Code: Choose the encrypt method used between routers. IP Bandwidth Control Enable IP bandwidth control: If you select it, the bandwidth control rule takes effect. Total Uplink Bandwidth: The rate of uploading through the WAN interface. Total Downlink Bandwidth: The rate of downloading through the WAN interface. Note: • The bandwidth conversion: 1 Mbps = 1024 Kbps.
150Mbps Wireless N Router www.phicomm.com System Tools There are ten submenus under the System Tools: Network Time settings, Diagnostics, WOL, Factory Defaults, Backup and Restore, Password, System Log, Traffic Statistics, Firmware Upgrade and Reboot. Click any of them, and you will be able to configure the corresponding function. Network Time Settings Current time: Show the current time. Time Zone: Select your time zone from the drop-down menu. Network time server: To set NTP server.
150Mbps Wireless N Router www.phicomm.com Diagnostics Select: Select Ping or Tracert. IP Address/Domain Name: The destination IP address or domain name. Ping Packet Total: The number of transmitted data packet when Ping operation is carried out. Ping Packet Size: The size of transmitted data packet when Ping operation is carried out. Ping Timeout: The timeout time of the ping operation. Tracert Hops: The hops of tracert. Click Start Diagnosis button, the selected ping or tracert testing will be started.
150Mbps Wireless N Router www.phicomm.com Wake On LAN WOL broadcasts so called Magic Packet Frames across a network to wake up hardware that understands such packets. These are normally NICs with Wake On LAN function. MAC Address: Add a MAC address to wake the computer on. Explain PC: Description about the computer. Click Add button, Select one or more computers in the list, and click Apply button, these computers will be waked up.
150Mbps Wireless N Router www.phicomm.com Backup and Restore In the Export Settings column, click Back up button to save all configuration settings to your local computer as a file. To restore the Router's configuration, follow these instructions: 1) Click Browse button to find the configuration file which you want to restore. 2) Click Save button to update the configuration with the file whose path is the one you have input or selected in the blank.
150Mbps Wireless N Router www.phicomm.com System Log The system log is a detailed record of the websites that users on your network have accessed or attempted to access. You can enable remote System Log function to view the log in remote place. Enable remote System Log: Check this option to enable remote System Log. If you click Save button, if will ask you to put in an IP address, this is the IP address for remote system log server, the log will be saved to that remote server.
150Mbps Wireless N Router www.phicomm.com Traffic Statistics This page used to display the current system memory usage, WLAN, LAN and WAN networks to send and receive data packets to the number. Firmware Upgrade You can upgrade the router to the lasted version in this page, please download a most recent firmware upgrade file from our website. After downloading the file, you need to extract the zip file before upgrading the router. Browse for the upgrade file, then click Upgrade button.
www.phicomm.com • 150Mbps Wireless N Router Please make sure the software version is matching with the existing hardware. Reboot Click Reboot button to reboot the Router. Logout Click Logout on the left side menu to exit from the router’s configuration page.
150Mbps Wireless N Router www.phicomm.com Chapter 4: Specification Wireless Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, CSMA/CA with ACK Data Rate 11n: 150Mbps 11g: 54Mbps 11b: 11Mbps Frequency Range 2.4-2.
150Mbps Wireless N Router www.phicomm.com Appendix A: Troubleshooting 1. PHICOMM Setup cannot find my Router. If PHICOMM Setup is not able to communicate with your Router during installation, please check the following items: 1) Ensure that the router and modem are both on. 2) Make sure the computer goes into the LAN port of the router. 3) Make sure the DSL modem goes into the WAN port of the router. 4) There may be firewall software on your computer preventing an outgoing connection.
150Mbps Wireless N Router www.phicomm.com 5. The computer cannot connect to the internet wirelessly. Please make sure you can access the Internet when plug in the Ethernet cable from the router to the computer, otherwise, please refer to Question 4. Then check the wireless connection status on your computer: 1) Search available networks and connect to your wireless network.
150Mbps Wireless N Router www.phicomm.com Appendix B: Certification FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
150Mbps Wireless N Router www.phicomm.com • This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. CE Mark Warning Marking with the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
150Mbps Wireless N Router www.phicomm.com Appendix C: Glossary 802.11b: The 802.11b standard specifies a wireless networking at 11 Mbps using direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks. 802.
150Mbps Wireless N Router www.phicomm.com PPPoE (Point to Point Protocol over Ethernet): PPPoE is a protocol for connecting remote hosts to the Internet over an always-on connection by simulating a dial-up connection. PPTP (Point-to-Point Tunneling Protocol): It is a method for implementing virtual private networks. SSID (Service Set Identification): It is a thirty-two character (maximum) alphanumeric key identifying a wireless local area network.
Shanghai Feixun Communication Co., Ltd. E-mail: support@phicomm.com Website: www.phicomm.com Copyright © 2011 Shanghai Feixun Communication Co., Ltd. All rights reserved.
