Operation Manual

150Mbps Wireless N Router
www.phicomm.com
53
Appendix A: Troubleshooting
5. The computer cannot connect to the internet wirelessly.
Please make sure you can access the Internet when plug in the Ethernet cable from the
router to the computer, otherwise, please refer to Question 4. Then check the wireless
connection status on your computer:
1) Search available networks and connect to your wireless network. If your wireless
network name (SSID) is not listed in, please connect to router’s LAN port by an Ethernet
cable, login router’s web management page 192.168.0.1 to make sure
2) If you cannot connect to your wireless network, please make sure the password is
correct. You can connect to router’s LAN port by an Ethernet cable, login router’s web
management page
the Broadcast
SSID is enabled. Please refer to Page 20 in this manual.
192.168.0.1 to double check your password
3) If there is no wireless network found in range on your computer, please make sure the
wireless switch is turned on, and the wireless network adapter is working properly.
. Please refer to Page 21
in this manual.
6. I’ve installed this new Router and some of my network clients (computers, game
consoles etc.) are unable to connect.
Your new Router came pre-configured with a network name and no password. All clients
must use this network name to connect wirelessly to your Router. You will need to find the
network settings on your client, and select the network name from the list of available
networks to join the wireless network. Details please refer to your client (computer, game
consoles etc.).