User Manual 300Mbps Wireless N Router FWR-714N User Manual / V2.
Copyright Statement PHICOMM is the registered trademark of Shanghai Feixun Communication Co., Ltd. Other trademark or trade name mentioned herein are the trademark or registered trademark of the company. Copyright of the whole product as integration, including its accessories and software, belongs to Shanghai Feixun Communication Co., Ltd. Without the permission of Shanghai Feixun Communication Co., Ltd., individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages.
00Mbps Wireless N Router www.phicomm.com CONTENTS Chapter 1: Introduction .............................................. 1 Product Overview ............................................................................................... 1 Main Features ....................................................................................................... 4 Chapter 2: Installation ................................................ 5 Physical Connection ........................................................
www.phicomm.com 300Mbps Wireless N Router WPS Settings.......................................................................................................................... 22 WDS Settings ......................................................................................................................... 23 DHCP Server....................................................................................................... 24 DHCP ....................................................................
www.phicomm.com 300Mbps Wireless N Router Static Routing Table............................................................................................................ 33 Dynamic Routing Settings................................................................................................ 34 IP Bandwidth Control ..................................................................................... 34 System Tools.........................................................................................
300Mbps Wireless N Router www.phicomm.com Chapter 1: Introduction Product Overview Thank you for choosing FWR-714N Wireless N Router. FWR-714N 300Mbps Wireless N Router is an all-in-one router, ideal for home and SOHO users to share broadband Internet connection over the wired and wireless network. With the speed of up to 300Mbps, it can provide users with extraordinary smooth internet surfing, internet phone calling, and on-line gaming.
300Mbps Wireless N Router www.phicomm.com complete, the LED is continuously lit. WLAN LED: The Wireless LED lights up when the wireless feature is enabled. It flashes when the Router sends or receives data over the wireless network. Wi-Fi Protected Setup (WPS) LED: If you have client devices (such as wireless adapters) that support Wi-Fi Protected Setup, then you can use the Wi-Fi Protected Setup button to automatically configure wireless security for your wireless network.
300Mbps Wireless N Router www.phicomm.com Rear Panel WPS: Press the button and the WPS LED in front panel flashing, WPS function is enabled. Reset: Long press and hold the button for 8 seconds, the Router will reboot to its factory default settings. WAN: Using an Ethernet cable (also called a network or Internet cable), the Internet port connects the Router to your Internet connection, which is typically a cable or Digital Subscriber Line (DSL) modem.
300Mbps Wireless N Router www.phicomm.
300Mbps Wireless N Router www.phicomm.com Chapter 2: Installation Physical Connection Note: • Actual product may be different as the picture, but the installation will be the same. • Please use the included power adapter. Use of a different power adapter could cause damage and void the warranty for this product. • Please ensure the Power, LAN and WAN lights are ON when the installation finished successfully.
www.phicomm.com 300Mbps Wireless N Router For Windows XP/2000 1) Click Start > Control Panel. 2) Select and double click Network Connections.
www.phicomm.com 300Mbps Wireless N Router 3) Right click Local Area Connection and then select Properties. 4) Select Internet Protocol (TCP/IP) and click Properties.
www.phicomm.com 300Mbps Wireless N Router 5) Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. For Windows Vista/7 1) Click Start>Control Panel.
www.phicomm.com 300Mbps Wireless N Router 2) Click Network and Internet. 3) Click Network and Sharing Center.
www.phicomm.com 300Mbps Wireless N Router 4) Go to Change Adapter Settings (win7)/Manage Network Connections (Vista). 5) Right click Local Area Connection, choose Properties.
300Mbps Wireless N Router www.phicomm.com 6) Select Internet Protocol Version 4 (TCP/IPv4) and click Properties. 7) Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK.
300Mbps Wireless N Router www.phicomm.com 1) Open your web browser, in the address bar, type in 192.168.0.1 2) You are prompt to enter the Username/Password (preset as admin/admin) which you can found on the label at the bottom of your router, and then click Login. 3) After successful login, you can see the web management page of the router comes up, please go to Setup Wizard on the left side menu, Click Next.
www.phicomm.com 300Mbps Wireless N Router a. Select Static IP if your ISP gives you the Static IP Address, Subnet Mask, Default Gateway and DNS Server Address, type in those information and then click Next. b. Select DHCP if your ISP does not gives you any IP numbers to use. This option is commonly used for cable modem services. Router will obtain IP address information automatically. In this case, no need to input anything but click Next. c. PPPoE is typically used for DSL services.
www.phicomm.com 300Mbps Wireless N Router e. Select PPTP if your ISP provides PPTP connection, and then click Next. 5) In this page, the SSID is the name of your wireless network, you can give it a different name. For the Wireless Mode, you can leave it as 11 b/g/n mixed mode, as for the Wireless Security, we recommend you to choose WPA-PSK/WPA2-PSK, and then set up a password, click Next. 6) Click Finish, then you can check the internet is working or not.
www.phicomm.com 300Mbps Wireless N Router Chapter 3: Router Configuration You can see there are twelve main menus on the left side of the router’s web management page. On the right side, you can see a small HELP button, there are the corresponding explanations and instructions. The Running Status page shows the current status of the Router. Network Settings The Network Settings section helps you to configure the Router to access the Internet.
300Mbps Wireless N Router www.phicomm.com WAN WAN Connection Type: To make sure the connection type your ISP provides, please refer to the ISP for more information. Dynamic IP (DHCP): Connections use dynamic IP address assignment, it means your ISP is running a DHCP server. Static IP: Connections use static IP address assignment, it means your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting. PPPoE: Connections requires username and password.
300Mbps Wireless N Router www.phicomm.com LAN MAC Address: The physical address of the router. IP Address: The LAN IP Address of the router. Subnet Mask: The Subnet Mask associated with the LAN IP Address. Note: If you changed the LAN IP Address of the router, please log in this web management page by the new IP address. MAC Address Clone Some ISPs require you to register the MAC Address of your computer. Choose Enabled, and then click Clone My PC’s MAC Address, then click Save.
300Mbps Wireless N Router www.phicomm.com Wireless Settings There are seven submenus under the wireless menu: Wireless Basic Settings, Wireless Security Settings, Wireless MAC Address Filter, Advanced Wireless Settings, Wireless Clients List, WPS Settings and WDS Settings. Click any of them, you will be able to configure the corresponding function.
300Mbps Wireless N Router www.phicomm.com change the wireless channel if you notice interference problems with another nearby access point, or the wireless performance is not as good as you expected. SSID Broadcast: If you choose Enabled, the wireless router will broadcast its name (SSID) . Channel Bandwidth: The bandwidth of the wireless channel, you can select 20MHz or 20/40MHz. Wireless Security Settings You can configure the security of your wireless network(s) in this page.
300Mbps Wireless N Router www.phicomm.com Shared Key: Select 802.11 Shared Key authentications. WEPAUTO: Select Shared Key or Open System authentication type automatically based on the wireless station's capability and request. You can select ASCII or Hex format. ASCII Format stands for any combination of keyboard characters in the specified length. Hex format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length.
300Mbps Wireless N Router www.phicomm.com You can allow/deny the computers connecting to the router wirelessly by entering the MAC address with this feature. If you only want MAC address (00:0A:EB:00:07:5F) to access the Wireless Network while others cannot: 1: Choose Allow for the security policy. 2: Fill MAC address 00:0A:EB:00:07:5F in and click Save. If you want MAC address (00:0A:EB:00:07:5F) cannot access the Wireless Network while others can: 1: Choose Reject for the security policy.
www.phicomm.com 300Mbps Wireless N Router Enable WMM: If you select it, the router will process the packets with the priority first. You are recommended to select this option. APSD Capable: It is used for auto power-saved service. It is Disabled by default. Wireless Clients List Click Refresh button to check the wireless clients. WPS Settings The WPS function can help you add a new device to the network quickly.
www.phicomm.com 300Mbps Wireless N Router network client and the router through encrypted contents. The users only enter the PIN code to configure without selecting encryption method and entering secret keys by manual. WPS Mode: Supports two ways to configure WPS settings: PBC (Push-Button Configuration) and PIN code. PBC: Select the PBC button or press the WPS button on the panel of the Router. (Press WPS button and WPS LED will blink, which means the WPS function is enabled.
www.phicomm.com 300Mbps Wireless N Router MAC address table or select one from the scanning table. At the same time, the connecting device should be in Lazy, Repeater or Bridge mode. Repeater Mode: You can select the mode to extend the distance between the two WLAN devices. Functioning as a WDS repeater, the connects to both a client card as an AP and to another AP. In typical repeater applications, APs connecting to other APs equipped with WDS functionality must also support WDS.
0Mbps Wireless N Router www.phicomm.com End IP Address: The last address in the IP Address pool. Lease Time: It is the time interval that server will change to use another DHCP address. Default Gateway: (Optional) Suggest to input the IP Address of the LAN port of the Router. Primary DNS Server: (Optional) Input the DNS IP address provided by your ISP. Or consult your ISP. Secondary DNS Server: (Optional) You can input the IP Address of another DNS server if your ISP provides two DNS servers.
www.phicomm.com 300Mbps Wireless N Router NAT There are five submenus under the NAT menu: Port Forwarding, Port Triggering, DMZ Host, UPnP and Multicast Forwarding. Click any of them, and you will be able to configure the corresponding function. Port Forwarding Choose Enabled, then click Add button. Rule’s Name: You can give this rule a name. Server IP Address: The IP address of the server you want to open the port, it is like 192.168.0.X.
300Mbps Wireless N Router www.phicomm.com Port Triggering Click Add button. Application Name: Describe the name of the application that being set. Please select one of the applications: There are few common applications available such as Dailpad, MSN gaming, PC Phone etc. the blank will be automatically filled once been chosen. Customize Application Name: If the application you want to add is not included, enter the blank manually. Start/End Trigger Port: The port for outgoing traffic.
300Mbps Wireless N Router www.phicomm.com Open Port Protocol: The protocol used for Incoming Ports Range, it can be TCP, UDP or TCP/UDP. If you are not clear about which protocol was being used, TCP/UDP is recommended. Note: • Before using Port Triggering, you should assign a static IP address to the designated server, and then enter this static IP address into router as the Server IP Address. • Please ensure the SPI Firewall was closed before setting the port triggering.
300Mbps Wireless N Router www.phicomm.com Multicast Forwarding Settings Multicast Forwarding enables the router to issue IGMP host message on behalf of hosts that the router discovered through standard IGMP interfaces. Group Mac: The Mac Address of the Multicast Forwarding Group. Group IP: The IP Address of the Multicast Forwarding Group. Host IP: The IP Address of the Group members. Port: The port number of the Multicast group. Status: The status of the Multicast group.
300Mbps Wireless N Router www.phicomm.com SPI (Stateful Packet Inspection): When the SPI firewall is enabled, the system refuses all requests from the Internet. Only packets that belong to connections that respond requests from the LAN and for which status database is created can pass the firewall and access to the LAN. By default, the SPI is enabled. To expose all hosts in the LAN to the Internet, you can disable SPI.
300Mbps Wireless N Router www.phicomm.com the PING packets to the WAN. Local Web Management By default, the router allows all computers in the LAN to log in to the router for Web management. If you select Allow only MAC addresses in the list to access the Web management page, and add MAC addresses to the list, only MAC addresses in the list can access the web management page of the router, while other computers in the LAN are blocked from accessing the router.
300Mbps Wireless N Router www.phicomm.com MAC/IP/Port Filter This page is used to enable the firewall filtering function, select the filtering service or manually set the parameters that need to be filtered, such as MAC address, IP address and Port. You must set at least one filtering condition. You may also set multiple conditions or all the conditions. MAC/IP/Port Filter: Select Enabled or Disabled to enable or disable filtering.
www.phicomm.com 300Mbps Wireless N Router Web URL Filter Web URL Filter: Check to enable URL filter. URL: Put in the URL you want to filter. Routing Settings There are two submenus under the Routing Settings menu: Static Routing Table and Dynamic Routing Settings. Click any of them, and you will be able to configure the corresponding function.
300Mbps Wireless N Router www.phicomm.com Gateway: This is the IP address of the default gateway device that allows for the contact between the Router and the network or host. Dynamic Routing Settings RIP: The Routing Information Protocol (RIP) is a dynamic routing protocol used in local and wide area networks. Choose Enable dynamic routing need to be activated. Rip Version: Choose the version of RIP. Authentication Code: Choose the encrypt method used between routers.
300Mbps Wireless N Router www.phicomm.com System Tools There are ten submenus under the System Tools: Network Time settings, Diagnostics, WOL, Factory Defaults, Backup and Restore, Password, System Log, Traffic Statistics, Firmware Upgrade and Reboot. Click any of them, and you will be able to configure the corresponding function. Network Time Settings Current time: Show the current time. Time Zone: Select your time zone from the drop-down menu. Network time server: To set NTP server.
300Mbps Wireless N Router www.phicomm.com Diagnostics Select: Select Ping or Tracert. IP Address/Domain Name: The destination IP address or domain name. Ping Packet Total: The number of transmitted data packet when Ping operation is carried out. Ping Packet Size: The size of transmitted data packet when Ping operation is carried out. Ping Timeout: The timeout time of the ping operation. Tracert Hops: The hops of tracert. Click Start Diagnosis button, the selected ping or tracert testing will be started.
300Mbps Wireless N Router www.phicomm.com Wake On LAN WOL broadcasts so called Magic Packet Frames across a network to wake up hardware that understands such packets. These are normally NICs with Wake On LAN function. MAC Address: Add a MAC address to wake the computer on. Explain PC: Description about the computer. Add: Click Add button to finish, and the computer will display in the list. Select one or more computers in the list, and click Apply button, these computers will be waked up.
300Mbps Wireless N Router www.phicomm.com Backup and Restore In the Export Settings column, click Backup button to save all configuration settings to your local computer as a file. To restore the Router's configuration, follow these instructions: 1) Click Browse button to find the configuration file which you want to restore. 2) Click Save button to update the configuration with the file whose path is the one you have input or selected in the blank.
www.phicomm.com 300Mbps Wireless N Router System Log The system log is a detailed record of the websites that users on your network have accessed or attempted to access. You can enable remote System Log function to view the log in remote place. Enable remote System Log: Check the radio button to enable remote System Log. Save: Click Save button to save your Log. Clean: Click Clean button to clear all shown information.
300Mbps Wireless N Router www.phicomm.com This page used to display the current system memory usage, WLAN, LAN and WAN networks to send and receive data packets to the number. Firmware Upgrade You can upgrade the router to the lasted version in this page, please download a most recent firmware upgrade file from our website. After downloading the file, you need to extract the zip file before upgrading the router. Browse for the upgrade file, then click Upgrade button.
300Mbps Wireless N Router www.phicomm.com Chapter 4: Specification Wireless Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, CSMA/CA with ACK Data Rate 11n: 300Mbps Frequency Range 2.4-2.
300Mbps Wireless N Router www.phicomm.com Appendix A: Troubleshooting 1. PHICOMM Setup cannot find my Router. If PHICOMM Setup is not able to communicate with your Router during installation, please check the following items: 1) Ensure that the router and modem are both on. 2) Make sure the computer goes into the LAN port of the router. 3) Make sure the DSL modem goes into the WAN port of the router. 4) There may be firewall software on your computer preventing an outgoing connection.
300Mbps Wireless N Router www.phicomm.com 5. The computer cannot connect to the internet wirelessly. Please make sure you can access the Internet when plug in the Ethernet cable from the router to the computer, otherwise, please refer to Question 4. Then check the wireless connection status on your computer: 1) Search available networks and connect to your wireless network.
300Mbps Wireless N Router www.phicomm.com Appendix B: Certification FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
300Mbps Wireless N Router www.phicomm.com • This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. CE Mark Warning Marking with the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
300Mbps Wireless N Router www.phicomm.com Appendix C: Glossary 802.11b: The 802.11b standard specifies a wireless networking at 11 Mbps using direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. 802.11b networks are also referred to as Wi-Fi networks. 802.
www.phicomm.com 300Mbps Wireless N Router Wi-Fi: A trade name for the 802.11b wireless networking standard, given by the Wireless Ethernet Compatibility Alliance (WECA, see http://www.wi-fi.net), an industry standards group promoting interoperability among 802.11b devices. WLAN (Wireless Local Area Network): A group of computers and associated devices communicate with each other wirelessly, which network serving users are limited in a local area.
Shanghai Feixun Communication Co., Ltd. E-mail: support@phicomm.com Website: www.phicomm.com Copyright © 2011 Shanghai Feixun Communication Co., Ltd. All rights reserved.
