Operation Manual

300Mbps Wireless N Router
www.phicomm.com
43
Chapter 3: Router Configuration
Rip Version: Choose the version of RIP.
Authentication Code: Choose the encrypt method used between routers.
IP Bandwidth Control
Enable IP bandwidth control: If you select it, the bandwidth control rule takes effect.
Total Uplink Bandwidth: The rate of uploading through the WAN interface.
Total Downlink Bandwidth: The rate of downloading through the WAN interface.
Note:
• The bandwidth conversion: 1 Mbps = 1024 Kbps.
• Select the type of the broadband line and the bandwidth according to the actual situation.
If you are not sure about the information, consult your broadband provider.
• After finishing the settings, click the Save button to apply the settings.
Check Enable IP Bandwidth Control box, enter the Total Uplink Bandwidth and Total Download
Bandwidth value, then click Save button.
Click Add button, you can add or edit the IP bandwidth control rules.