Operation Manual

Phicomm K3C - AC1900 Smart Wi-Fi Router

DHCP

DHCP is commonly used if internet service provider

does not provide any IP to use. Router will obtain IP

address information automatically.

PPPoE

PPPoE is typically used for DSL services. Enter the

username and password provided by your internet

service provider.

Static IP address

Select Static IP if internet service provider provides the

static IP address, subnet mask, default gateway and DNS

server address.

PPTP/L2TP

Select PPTP or L2TP if ISP provides the username,

password, and VPN server IP.

Note

Contact your ISP if you are not sure about your internet connection

type.

5. Set SSID and password (no less than 8 characters) for your wireless network or use

the default settings. Click Save to complete the setup.

6. Now Wi-Fi has been successfully set up on your router. If your device does not