Operation Manual

Phicomm K3C - AC1900 Smart Wi-Fi Router

Note

For detailed information of the VPN client program or application, please

refer to the corresponding instructions from the service provider.

6.10 VPN client

With VPN Client configured on a Phicomm router, you can establish a VPN tunnel

connecting to a VPN server over internet.

To set up a connection from VPN client to VPN server, follow these steps below:

1. On Web Management, go to Main menu > Advanced > VPN Client.

2. Toggle on VPN Client switch, enter a rule name for the VPN connection, VPN server

IP address or domain name (sometime also called host name), select protocol, and

enter VPN server authentication information (username and password).