Operation Manual

Copyright @ 2014 Phicomm Europe GmbH 2014. Print for private use only.
25
1. Open the Card Slot with the Card Pin.
2. Insert the Micro SD card into the slot with its gold contacts
facing down.
NOTICE: Both Nano card and Micro SD card can be
installed into the right card slot, but just one at the same
time.
CHARGING THE BATTERY
1. Connect the power adapter and the USB connector of the
phone with the USB cable.
2. Plug in the power adapter to an electrical outlet to start
charging the battery.
NOTICE: When charging the battery with the phone on,
the charging battery icon is displayed in phone’s status
bar. After the battery is fully charged, the charging battery
icon turns to a full battery icon .
OPTIMIZATION OF BATTERY POWER
Use the following tips to improve your battery performance.
 Charge the device frequently.
 Disable all data connections over mobile network, if there is no
internet access.