PHICOMM Smart Scale S7 User Manual S e i t e 1 | 34
Content 1 Introduction..................................................................................................................................... 4 1.1 Health Information .................................................................................................................. 4 1.2 Safety information................................................................................................................... 5 1.3 Legal information ..............................................
7 6.9 Basal Metabolic Rate (BMR) .................................................................................................. 25 6.10 Protein ................................................................................................................................... 26 6.11 Body Score ............................................................................................................................. 26 Settings ....................................................................
1 Introduction 1.1 Health Information The device may only be used in accordance with its intended use as well as in compliance with the instructions for use, otherwise the guarantee claim will be forfeited. The device is not suitable for the following persons: ① Pregnant ② Children under 16 years old ③ Persons with heart pacemakers or other electronic implants. The measurement of weight is also possible for children.
1.2 Safety information ATTENTION / WARNING Place the scale on a flat and firm ground to ensure a safe and reliable measurement. When weighing, do not stand completely on one side and not on the edge. Protect the device from moisture and keep it away from water. When wet / damp, the surface of the scale is slippery. Keep the surface dry. Do not use the device if it is dropped or dropped into water. Use the device only if it works properly.
With the exception of the instructions in the user manual, you must never repair the device yourself. Repairs should only be carried out by an authorized service partner or the manufacturer. Use the scale only with original manufacturer parts. The use of non-original parts can lead to damage. This device is designed for home use only. It is not designed for professional use (e.g. in hospitals or medical and sports facilities). Using the scale in a professional facility will void the warranty. 1.
service providers provide content and services through network or transmission tools outside of the control of Phicomm (Shanghai) Co. Ltd. to the greatest extent permitted by applicable law, it is explicitly stated that Phicomm (Shanghai) Co. Ltd. shall not compensate or be liable for services provided by third-party service providers or the interruption or termination of third-party contents or services. Phicomm (Shanghai) Co. Ltd.
2 About PHICOMM Smart Scale S7 But what exactly is behind the Smart Health in general refers to a digitization of the healthcare system. This includes not only digital medical records and telemedicine, but also the simple monitoring of body parameters from home. The body analysis scale can make a positive impact to this: with 22 different measured values, the Smart Scale S7 provides a detailed overall picture of your physical condition. You can always keep a good overview of your health.
Internet connection indicator. Flashing. Weigh with 4 electrodes. Flashing tree times. Weigh with 8 electrodes.
3 Pair with PHICOMM Health App Smart Health also includes a transparent app that helps you to manage the data from the body analysis scale. The corresponding PHICOMM-Health app synchronizes itself automatically via Wi-Fi connection during the measurement. The app gives you the opportunity to work towards your own goals and to share your achievements with others. With simple graphics, you can quickly gain a deeper understanding of your own body.
3.1 Registration 3.1.1 Registration with e-mail 1. Tap on Register. 2. Enter your e-mail address. 3. Tap on Send code. The verification code will be sent to the specified e-mail address. Please also check your spam folder. 4. Enter your e-mail verification code. 5. Enter your original Password. The password should be between 6-18 characters long (at least two-character types using letters, numbers and special characters). 6. Read and accept the user registration agreement. 7. Tap on Register. 8.
4. You will be automatically singed in via your Google account. You now can use the PHICOMM Health App. 3.1.3 Registration with Facebook 1. Login to Facebook first. 2. Open the PHICOMM Health App. 3. Tap on 4. You will be automatically signed in via your Facebook account. You now can use the PHICOMM Health App. 3.2 Link scale to app You can link the Smart Scale S7 by two methods: from RESET status or via QR code. 3.2.
7. While the connection is being set up, the scale display alternately shows and the Wi-Fi signal flashes . 8. Please confirm that the signals are flashing by tapping on the blue circle. 9. Tap on Connect Wi-Fi, to finally connect the app to the scale. The connection can take a few moments. If the connection is successful, you will receive a message. 10. Tap on OK to finalize the set up. 3.2.
NOTICE The Phicomm Smart Scale S7 only works with a 2.4GHz Wi-Fi network. If you have a dual-band router at home, please adjust your router settings to allow the Smart Scale S7 connecting only to the 2.4GHz band.
4 Using Smart Scale S7 To get the most accurate measurements you always weigh yourself without clothes and barefoot. Make sure that the back of your feet are centered on the weighting platform. It does not matter if your feet are too big and overhang the edge. You still will get accurate readings. You should do the measurements always at the same time of day if possible.
4.2 Measurements with App To carry out the measurement in connection with the app, proceed as follows: 1. Start PHICOMM Health App. 2. Tap on . 3. Step on the scale as soon as the following screen appears. 4. Perform the steps as in chapter 4.1. 4.3 Only-weight-measurement If you wish to measure your weight only, simply step on the scale not using the hand electrodes and read off your weight.
5 Review your measurement results NOTE The data taken by the S7 scale are for your reference and information only. These are no diagnoses, preventative measures, treatment options or healing methods! 5.1 Without using the app If you weighed yourself without using the app, you will get following icon in the notification bar of your smartphone: 1. Tap on the icon. The PHICOMM Health App will open. 2. On the start screen you will find a new entry at the bottom. 3. To confirm tap on Claim.
① The homescreen shows a brief overview of your data incl. weight, body fat and history diagrams. ② The Data trends shows graphics of your weight, body fat and BMI. Tap on ③ The History data gives you an overview of your previously measured results on weight and body fat. Tap on To get all other values you have to enter the detailed overview. Tap on Weight fat data. 5.3 Body Score The Body Score gives you a brief information about your general body condition and body composition.
5.4 Meaning of the colors The individual values are marked in different colors. The colors give you a quick overall overview of your body conditions. The S7 scale automatically compares your values with the default values (overview in chapter “Explanation of the results”) and colors the values accordingly.
6 Explanation of the results Eight highly accurate electrodes allow precise body measurement. The body analysis scale calculates your body values with the so-called bioelectrical impedance analysis (BIA method). Light electrical signals are being send through the scale electrodes as well as the corresponding hand-electrode through your body. The body water is determined according to the Brozek formula and the measured flow resistance (bioelectric impedance) and can be converted into the body fat percentage.
Classification of the calculated values according to WHO (Word Health Organization): Gender Age From To Status both > 20 years < 18.5 Underweight both > 20 years 18.5 24.99 Normal weight both > 20 years 25 29.99 Overweight both > 20 years >30 Obese 6.2 Body Age The body (biological) age indicates your biological age upon your health and fitness level compared to your real age. People with higher muscle mass and higher BMR will be of lower biological age. 6.
male female female female female female female female female female female female female > 60 18 - 39 18 - 39 18 - 39 18 - 39 40 - 59 40 - 59 40 - 59 40 - 59 > 60 > 60 > 60 > 60 > 29% 21% 33% > 39% 23% 34% > 40% 24% 36% > 42% > 21% 33% 39% >23% 34% 40% >24% 36% 42% Obese Low Normal High Obese Low Normal High Obese Low Normal High Obese 6.4 Body Shape The body type is calculated based on the BMI and BFR.
Heavy Very muscular Athletic Fat Obese male male male male male 22-27% <15% <15% 22-27% >27% 25-29.9 >25 21-24.9 >30 >30 6.5 Muscle The muscle mass is calculated from the weight of the muscles (skeletal muscles, smooth muscles and water contained in the muscles). The muscles provide your body with energy. The higher your muscle mass, the more energy you consume while still at rest. Thus, also your body fat percentage can be reduced.
6.6 Bone mass The bone mass is calculated from the existing bone minerals in your body. While your bone mass does not change substantially in short term, it is important to maintain healthy bones by having a balanced diet rich in calcium and by doing plenty of weight-bearing exercise.
6.8 Visceral fat Visceral fat is located deep in the abdominal area, surrounding and protecting the vital organs. Visceral fat is generally expressed with grades. 10 grades are equivalent to an area of 100 cm² of visceral fat. High visceral fat may lead to hyperlipidemia, arteriosclerosis, hypertension, myocardial infarction, cerebral thrombosis, cerebral hemorrhage, diabetes type 2, fatty liver and other disorders.
Formula for women: 655 + (9.5 x weight in kilograms) + (1.9 x size in centimeters) – (4.7 x age in years) Formula for men: 66 + (13,8 x weight in kilograms) + (5,0 x size in centimeters) – (6,8 x age in years) This results in the following default values: Basal metabolism Age 18-29 30-49 50-69 >70 Female 1390 1340 1270 1170 Male 1820 1740 1580 1410 6.10 Protein Protein is a solid organic compound that consists of nitrogen and can be found in body cells.
7 Settings You can access the settings via the menu button ME Here you can make changes to your account, adjust your goals, manage your account or get useful information. 7.1 Manage personal profile Enter and customize the profile picture, user name, height, weight, date of birth and a description of yourself. 1. Tap on ME 2. Tap on your Account. 3. Make your changes and tap on Save. 7.2 Manage members / users 1. Tap on ME 2. Tap on Members. 3. To add a new user, tap on .
7.3 Adjust goals 1. Tap on ME 2. Tap on Target. 3. You now can set your target weight and / or target BFR by moving the slider. 4. Tap on Save. 7.4 Delete measurements Delete individual or all measurements. 1. Tap on Health 2. Tap on History data 3. Tap on the menu 4. Tap on All, to delete all measurements. 5. Tap on an individual measurement. 6. Tap on Delete 7. Confirm with OK. 7.5 Change password for your account 1. Tap on ME 2. Tap on Account manage. 3. Tap on Modify PW to change your password. 4.
2. Tap on Account manage. 3. Tap on change E-mail address. 4. Type in your authentication code. If you don’t remember the code tap on Send code. 5. Confirm with Submit. 6. Insert your new e-mail address. 7. Type in your authentication code. 8. Confirm with Submit. 7.7 Logout 1. Tap on ME 2. Tap on Account manage. 3. Tap on Exit. 4. Confirm with OK. 7.8 Get information Get useful information about your scale S7. 1. Tap on ME 2.
Alternatively, you also can check for new software updates: 1. Tap on ME 2. Tap on Update checking. 3. You will be prompted to the Google Play Store / Apple Store. If an update is available, tap on Update. 7.10 Unit change The S7 scale is set to kg by default. Pounds also can be displayed. 1. Tap on DEVICE 2. Tap on the connected Smart Scale S7. 3. Tap on Unit change. 4. Tap on lb., to switch to pounds. 7.11 Reset Wi-Fi Reset your wireless network as following: 1. Prepare the appropriate Wi-Fi network.
8. While the connection is being set up, the scale display alternately shows and the Wi-Fi signal flashes .. 9. Please confirm that the signals are flashing by tapping on the blue circle. 10. Tap on Connect Wi-Fi, to finally connect the app to the scale. The connection can take a few moments. If the connection is successful, you will receive a message. 11. Tap on OK to finalize the set up.
8 Trouble shooting What can I do, when the pairing with app failed? Possible reasons for network configuration failure: 1. Wrong network name / password. 2. Unstable network connection during configuration. 3. Wi-Fi hotspot is updating or the router password has changed. 4. No 2.4GHz Wi-Fi network (The Smart Scale S7 only works with 2.4GHz) is available. If the configuration failed, go to the previous menu item and reenter the Wi-Fi network password. Possible failure causes: 1.
What can I do if the results are too inaccurate? The placement of the scale can have an impact on the results. Please place the scale on a level and hard surface. Please also pay attention to: 1. Please take off your shoes and socks. You must step on the scale barefoot. 2. Make sure the scale is clean (you can clean it with a slightly damp, lint-free cloth). 3. Please do not move during the measurement. 4. Please do not leave the scale until the symbols on the display stop flashing. 5.
9 Technical data Full Body Composition Monitoring. Precise tracking with high-accuracy. Equipped with a 4-point-segement measurement with 8 high precision sensors for up to 22 precision body measurements. Can store up to 10 users' profiles and tailored modes to share your profile easily with your beloved ones. Rechargeable build-in 2000mAh Lithium battery and high impact-resistant solid tempered glass are designed to ensure a long-lasting life.
