User's Manual

13
Chapter 3: Router Configuration
300Mbps Wireless N Rouer
Wireless Status: If you do not have any other wireless devices in your network, select
Wireless Disabled.
Wireless Network Name (SSID): The name of routers wireless network. The wireless work
station must keep the same SSID name with the APs for connections. By select Hidden or
Isolated, the device can open or close to search available APs.
Mode: From this drop -down menu, you can select the wireless standards running on your
network:
•
11b /g /n - M i x e d : If you have only Wireless-G Wireless-N and Wireless-B devices in your
network, select 11b /g / n - M i x e d .
•
11b /g - M i x e d : If you have only Wireless-G and Wireless-B devices in your net work, select
11b / g - M i x e d .
•
Wireless-G Only: If you have only Wireless-G devices, select Wireless-G Only.
•
Wireless-B Only: If you have only Wireless-B devices, select Wireless-B Only.
Channel: You can use the channel same as the AP. By enabling Open Scanning but ton to
find out the available APs channel.
SSID Broadcast: Select enable to enable the devices SSID to be visible by wireless clients.
BSSID: It is a 48-bit identit y used to identify a particular BSS (Basic Service Set) within an
area. In Infrastructure BSS networks, the BSSID is the MAC (Medium Access Control) address
of the AP.
Frequency Bandwidth: Select wireless work frequency 20M or 20/40M.
Save: Click the Save but ton to save your set ting.
Wireless Security Settings
The wireless securit y set tings configure the security of your wireless network(s). Six wireless
securit y modes, WEP, WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-Enterprise and
RADIUS, are supported. If you do not want to use wireless security, select Disable from the
drop-down menu.
WIRELESS NETWORK NAME (SSID): Select SSID to be configured securit y. The device