User's Manual

16
Chapter 3: Router Configuration
300Mbps Wireless N Rouer
•
LAN Interface Settings
MAC Address: The Routers physical MAC address as seen on your local network, which
is unchangeable.
IP Address: The Routers LAN IP Address (not your PCs IP address). Once you modify the
IP address, you need to remember it for the Web-based Utilit y login next time. 192.168.0.1
is the default value.
Subnet Mask: It ’s shown the Routers subnet mask for measurement of the network size.
255.255.255.0 is the default value.
Save: Click the Save but ton to save your set ting.
Note:
•
If the LAN IP Address changes, you must use the new IP address to log in to the router,
in order to access the Web configuration page.
•
If the new LAN IP address is in a different network segment from the original LAN IP
address, the dynamic IP service of the router is automatically switched to work in the
network segment of the new LAN IP address. To apply virtual server, DMZ host and
DHCP Static Address Allocation, please perform the set tings again.
•
WAN Interface Settings
Please refer to Basic Setting > WAN Interface Settings.
•
PPTP VPN Server
A PPTP Server (Point-To-Point Tunneling Protocol) allows you to connect securely from a
remote location (such as your home) to an LAN (Local Area Net work) located in another
location, such as your workplace, business office, etc. This way you can use the services
provided in your office at the comfort of your home.