User's Manual

17
Chapter 3: Router Configuration
300Mbps Wireless N Rouer
PPTP Server Basic Settings: Point-to-Point Tunneling Protocol (PPTP) allows the Point-
to-Point Protocol (PPP) to be tunneled through an IP net work. To allow PPTP tunnels to
pass through the Router, keep the default as Enabled.
Force MPPE Encryption: Keep the default as Enabled.
PPTP user: Enter PPTP username provided by your ISP.
PPTP password: Enter PPTP password provided by your ISP.
PPTP client IP: Enter the PPTP client IP address.
Click the Add but ton to save your setting.
•
MAC Address Cloning
A MAC address is a 12-digit code assigned to a unique piece of hardware for identification.
Some ISPs require you to register a MAC address in order to access the Internet. If you
were using cable modem, you were suggested to clone the current registered MAC
address to the router. This page was designed to realize this function.
Note: To enable this function, you would to ensure the computer connecting to the
router is the main computer, and the computer links to the router by cable.
Disable/Enable: To have the MAC address cloned, select Enable.
MAC Address: The MAC address to be registered with your Internet service provider.
Fill my MAC address: Click this button, system will clone the registered MAC address