User's Manual
Table Of Contents
- _
-  Introduction
-  Installation
-  Router Configuration
-  Specification
-  Appendix A: Troubleshooting
-  Appendix B: CE Mark Warning
-  Appendix C: Glossary
-  Appendix D: Technical Support
19
Chapter 3: Router Configuration
300Mbps Wireless N Rouer
2. Fill MAC address 00:0A:EB:00:07:5F in and click Save.
If you want MAC address (00:0A:EB:00:07:5F) cannot access the wireless network while
others can:
1. The securit y policy chooses to refuse.
2. Filling MAC address 00:0A:EB:00:07:5F in and click Save.
In the MAC Address list, click Remove to delete the MAC addresses selected.
•
Advanced Wireless Settings
This section is to configure the advanced wireless setting of the Router, including the
Radio Preamble, 802.11g/n Rate, Fragmentation Threshold, RTS Threshold, Beacon Period
and DTIM Interval.
BG protection Mode: Auto by default. You can select On or Off.
Beacon Interval: The interval for sending packets of the Beacon frame. Its value range is
20.1000ms, default as 100.
DTIM Interval: It indicates the interval of the delivery traffic indication message (DTIM).
The value range is between 1 and 255 milliseconds. The default value is 1.
Fragment Threshold: Set the fragmentation threshold. Packets larger than the size set