User's Manual

20
Chapter 3: Router Configuration
300Mbps Wireless N Rouer
in this field will be fragmented. Too many data packets will lower the wireless network
performance. The Fragment Threshold value should not be set too low. The default value
is 2346.
RTS Threshold: Set the RTS (Request to send threshold) threshold. When the packet size
is larger than the preset RTS size, the wireless router will send a RTS to the destination
station to start a negotiation. The default value is 2347.
TX Power: You can set the output power of wireless radio. Unless you are using this
wireless router in a really big space, you may not have to set output power to 100%. This
will enhance security (malicious/unknown users in distance will not be able to reach your
wireless router).
Enable WMM: If you select it, the router will process the packets with the priorit y first.
You are recommended to select this option.
APSD Capable: It is used for auto power-saved service. The default is Disabled.
MAC Address List: The added MAC addresses are listed here. Click the Delete but ton to
delete the filter management for this MAC address.
Save: Click the Save button to save your Log.
Note: If you are not familiar with the set ting items in this page, it’s strongly
recommended to keep the provided default values; otherwise it may result in lower
wireless network performance.
•
Wireless Client List
Show wireless clients access to the wireless net.
•
WPS Settings
In this page, you can configure the WPS set tings, which can make your client
automatically synchronize with the AP set ting within several minutes and establish the
connection.