User's Manual

21
Chapter 3: Router Configuration
300Mbps Wireless N Rouer
WPS (Wi-Fi Protected Setting): Easy and quick to establish the connection between
wireless net work client and Router through encrypted contents. The users only enter the
PIN code to configure without selecting encryption method and entering secret keys by
manual.
WPS Mode: Supports two ways to configure WPS set tings: PBC (Push-Button
Configuration) and PIN code.
PBC: Select the PBC button or press the WPS but ton on the panel of the Router. (Press
WPS button and WPS LED will blink, which means the WPS function is enabled. During
the blinking time, press the WPS but ton on another network device, WPS LED light will
become solid when the connection succeeds.)
PIN: If this option is enabled, you need to enter a wireless clients PIN code in the blank
and keep the same code in the client.
Save: Click the Save but ton to save your set ting.
•
WDS Settings
In this page, you can configure the function of WDS, supporting Repeater mode,
Bridge mode and Lazy mode. You’d better use the same router in order to optimize the
performance.