User's Manual
Table Of Contents
- _
-  Introduction
-  Installation
-  Router Configuration
-  Specification
-  Appendix A: Troubleshooting
-  Appendix B: CE Mark Warning
-  Appendix C: Glossary
-  Appendix D: Technical Support
23
Chapter 3: Router Configuration
300Mbps Wireless N Rouer
set ting.
DHCP Server
The TCP/ IP protocol set tings include the information of the IP address, subnet mask, gateway,
and DNS server. Properly configuring the TCP/IP protocol for all computers in the LAN is not
easy. Fortunately, the DHCP server provides this function.
•
DHCP Service
If you enable DHCP server of the router, the DHCP server automatically configures the
TCP/IP protocol for each computer in the LAN.
Start Address of Address Pool: The first IP address that is automatically assigned by
the DHCP server.
End Address of Address Pool: The last IP address that is automatically assigned by the
DHCP server.
Lease Time: The time length of the corresponding IP address lease.
Gateway: You can enter the LAN IP address of the router. The default is 192.168.0.1. It is
optional.
Primary DNS Server: Enter the information of the DNS server provided by the ISP. You
can consult your ISP. It is optional.
Secondary DNS Server: If the ISP provides you two DNS servers, you can enter the IP
address of the other DNS server in this field. It is optional.
Save: Click the Save but ton to save your set ting.