User's Manual

25
Chapter 3: Router Configuration
300Mbps Wireless N Rouer
•
Port Forwarding
Disable/Enable: To realize the function of port forwarding, select Enable.
Rules Name: Enter the Rules Name.
Server IP Address: Enter the IP address of the server that should receive these requests.
Details please refer to the note below.
Server Port Rang: The numbers of External Ports. You can t ype a service port or a range
of service ports (in XXX – YYY format, XXX is the start port number, YYY is the end port
number).
Client Port Rang: The numbers of client Ports. You can t ype a client port or a range
of client ports (in XXX – YYY format, XXX is the start port number, YYY is the end port
number).
Protocol: Select the protocol (TCP/UDP/Both) for the application.
Save: Click the Save but ton to save your set ting.
Note:
•
Before using port forwarding, you should assign a static IP address to the designated
server, and then enter this static IP address into router as the Server IP Address.
•
Please ensure the SPI Firewall was closed before set ting the port triggering. You could
check the SPI Firewall settings at Expert Set tingSecurit y OptionsSecurit y Set tings.
•
Port Triggering Settings
Choose menu Forwarding > Port Triggering, you can view and add port triggering in
the screen as shown below. Some applications require multiple connections, like Internet
games, video conferencing, Internet calling and so on. These applications cannot work
with a pure NAT Router. Port Triggering is used for some of these applications that can
work with an NAT Router.