User's Manual
Table Of Contents
- _
-  Introduction
-  Installation
-  Router Configuration
-  Specification
-  Appendix A: Troubleshooting
-  Appendix B: CE Mark Warning
-  Appendix C: Glossary
-  Appendix D: Technical Support
27
Chapter 3: Router Configuration
300Mbps Wireless N Rouer
Please select one of the applications: There are few common applications available
such as Dailpad, MSN gaming, PC Phone etc. the blank will be automatically filled once
been chosen.
Custom application name: If the application you want to add is not included, enter the
blank manually.
Save: Click the Save but ton to save your set ting.
Note:
•
Before using port forwarding, you should assign a static IP address to the designated
server, and then enter this static IP address into router as the Server IP Address.
•
Please ensure the SPI Firewall was closed before setting the port triggering. You
could check the SPI Firewall set tings at Expert Set ting > Security Options > Security
Settings.
•
DMZ Host
DMZ Host forwards all the ports at the same time to one PC.
DMZ Status: Click the checkbox to choose disable or enable DMZ.
IP Address of DMZ Host: Click Search IP Address to clone the IP address of the
computer you want to expose.
Save: Click the Save but ton to save your set ting.
To set a DMZ host, do as follows:
1.
Enter the IP address of the computer in the LAN that you want to set to a DMZ host in
the DMZ Host IP Address field.
2.
Select Enabled.
3.
Click Save to complete the set tings.
Note:
•
Before using DMZ Host, you should assign a static IP address to the designated server,
and then enter this static IP address into router as the Server IP Address.
•
DMZ priorit y is higher than the Port Forwarding, if the DMZ open, all the port
forwarding rules are not effective.