User's Manual

31
Chapter 3: Router Configuration
300Mbps Wireless N Rouer
Access Control
There are t wo submenus under the Access Control menu. Click any of them, and you will be
able to configure the corresponding function.
•
MAC/IP/Port Filter Settings
This page is used to enable the firewall filtering function, select the filtering service or
manually set the parameters that need to be filtered, such as MAC address, IP address and
Port. You must set at least one filtering condition. You may also set multiple conditions or
all the conditions.
MAC/IP/Port Filtering: Select Enabled or Disabled to enable or disable filtering.
Default Policy: Accepted chose, all the packets and devices will be allowed to be
passed normally, opposite action will be happened if Dropped was been chosen.
Current IP/Port Filtering Rules: All the existing rules will be listed below, any needed of
rules deleting, please select the rules, and then click Delete Selected.
Note: Please synchronize the routers time first when selecting the timing function.
•
Web URL Filtering