User's Manual

32
Chapter 3: Router Configuration
300Mbps Wireless N Rouer
Web URL Filter: Check to enable URL filter.
Save: Click the Save but ton to save your set ting.
Routing Settings
There are two submenus under the Routing Setting menu. Click any of them, and you will be
able to configure the corresponding function.
•
Static Routing Table
The main duty for router is to look for a best path for every data frame, and transfer this
data frame to destination. So, it is essential for the router to choose the best path, i.e.
routing arithmetic. In order to finish this function, many transferring paths, i.e. routing
table, are saved in the router, for choosing when needed.
•
Dynamic Routing Settings
RIP: The Routing Information Protocol (RIP) is a dynamic routing protocol used in local
and wide area networks. Choose Enable dynamic routing need to be activated.
Rip Version: Choose the version of RIP.
Authentication Code: Choose the encrypt method used between routers.
Save: Click the Save but ton to save your set ting.