User's Manual
Table Of Contents
- _
-  Introduction
-  Installation
-  Router Configuration
-  Specification
-  Appendix A: Troubleshooting
-  Appendix B: CE Mark Warning
-  Appendix C: Glossary
-  Appendix D: Technical Support
Appendix A: Troubleshooting
42
300Mbps Wireless N Rouer
•
Search available net works and choose your network. If your network SSID is not listed in,
please connect to Router via a net work cable, visit 192.168.0.1 and ensures the Broadcast
SSID is enabled. This setting can be found on the Wireless Settings page.
•
Make sure the wireless network name or SSID is the same on both the computer and the
Router.
•
If you have enabled wireless securit y, then make sure the same securit y method and key
are used by both the computer and the Router.
6. I’ve installed this new Router and some of my network clients (computers, game
consoles etc.) are unable to connect.
Your new Router came pre-configured with a network name and no password. All clients
must use this network name to connect wirelessly to your Router. You will need to find
the network set tings on your client, and select the network name from the list of available
networks to join the wireless network. Details please refer to your client (computer, game
consoles etc.).