User's Manual

300Mbps Wireless N NAS Rout
www.phicomm.com
21
Chapter 3: Router Configuration
WAN
WAN Connection Type: To make sure the connection type your ISP provides, please refer
to the ISP for more information.
Dynamic IP (DHCP): Connections use dynamic IP address assignment, it means your ISP is
running a DHCP server.
Static IP: Connections use static IP address assignment, it means your ISP provides a static
or fixed IP Address, Subnet Mask, Gateway and DNS setting.
PPPoE: Connections requires username and password.
L2TP: Layer 2 Tunneling Protocol (L2TP) is a service applies to connections in Israel only.
PPTP: Point-to-Point Tunneling Protocol (PPTP) is a service applies to connections in Europe
only.
Select the connection type according to the information provided by your Internet Service
Provider (ISP), and fill in the information accordingly.
MTU Size (in bytes): The default MTU (Maximum Transmission Unit) value is 1500 Bytes.
Sometimes you need to modify the MTU required by your ISP.
Manually configure the DNS server: Check this option if your ISP gives you one or two