User's Manual

300Mbps Wireless N NAS Rout
www.phicomm.com
29
Chapter 3: Router Configuration
default values, otherwise it may result in lower wireless network performance.
BG protection Mode: Auto by default. You can select On or Off.
Beacon Interval: The interval for sending packets of the Beacon frame. Its value range is
20-1000 in unit of ms. The default is 100.
DTIM Interval: It indicates the interval of the delivery traffic indication message (DTIM).
The value range is between 1 and 255 milliseconds. The default value is 1.
Fragment Threshold: Set the fragmentation threshold. Packets larger than the size set in
this field will be fragmented. Too many data packets will lower the Wireless Network
performance. The Fragment Threshold value should not be set too low. The default value is
2346.
RTS Threshold: Set the RTS (Request to send threshold.) threshold. When the packet size
is larger than the preset RTS size, the wireless router will send a RTS to the destination
station to start a negotiation. The default value is 2347.
TX Power: You can set the output power of wireless radio. Unless you are using this
wireless router in a really big space, you may not have to set output power to 100%. This
will enhance security (malicious/unknown users in distance will not be able to reach your
wireless router).
Enable WMM: If you select it, the router will process the packets with the priority first. You
are recommended to select this option.
APSD Capability: It is used for auto power-saved service. It is Disabled by default.