User's Manual

300Mbps Wireless N NAS Rout
www.phicomm.com
34
Chapter 3: Router Configuration
DHCP Server: If you disable the server, please make sure you have another DHCP server in
your network.
Start IP Address: The first address in the IP Address pool.
End IP Address: The last address in the IP Address pool.
Lease Time: It is the time interval that server will change to use another DHCP address.
Default Gateway: (Optional) Suggest to input the IP Address of the LAN port of the Router.
Primary DNS Server: (Optional) Input the DNS IP address provided by your ISP. Or consult
your ISP.
Secondary DNS Server: (Optional) You can input the IP Address of another DNS server if
your ISP provides two DNS servers.
Note: To use the DHCP server function of the router, please configure all computers in the
LAN as Obtain an IP Address automatically mode. This function will take effect after the
router rebooted.
DHCP Clients list
Here you can see the information of DHCP Clients.
Refresh: Click Refresh button to refresh the DHCP clients list.