User's Manual

300Mbps Wireless N NAS Rout
www.phicomm.com
2
Chapter 1: Introductio
Power LED: The Power LED lights up when the Router is powered on. When the Router
goes through its self-diagnostic mode during every boot-up, the LED flashes. When the
diagnostic is complete, the LED is continuously lit.
WLAN LED: The Wireless LED lights up when the wireless feature is enabled. It flashes when
the Router sends or receives data over the wireless network.
WPS (Wi-Fi Protected Setup) LED: If you have client devices (such as wireless adapters)
that support Wi-Fi Protected Setup, then you can use the Wi-Fi Protected Setup button to
automatically configure wireless security for your wireless network. To use Wi-Fi Protected
Setup, refer to the section of Wi-Fi Protected Setup.
USB LED: The USB LED lights up when a storage device or a USB printer has connected to
the USB port.