User's Manual

300Mbps Wireless N NAS Rout
www.phicomm.com
81
Appendix A:
5. The computer cannot connect to the internet wirelessly.
Please make sure you can access the Internet when plug in the Ethernet cable from the
router to the computer, otherwise, please refer to Question 4. Then check the wireless
connection status on your computer:
1) Search available networks and connect to your wireless network. If your wireless
network name (SSID) is not listed in, please connect to router’s LAN port by an
Ethernet cable, login router’s web management page 192.168.0.1 to make sure
2) If you cannot connect to your wireless network, please make sure the password is
correct. You can connect to router’s LAN port by an Ethernet cable, login router’s
web management page
the
Broadcast SSID is enabled. Please refer to Page 20 in this manual.
192.168.0.1 to double check your password
3) If there is no wireless network found in range on your computer, please make sure
the wireless switch is turned on, and the wireless network adapter is working
properly.
. Please refer to
Page 21 in this manual.
6. I’ve installed this new Router and some of my network clients (computers, game
consoles etc.) are unable to connect.
Your new Router came pre-configured with a network name and no password. All clients
must use this network name to connect wirelessly to your Router. You will need to find
the network settings on your client, and select the network name from the list of
available networks to join the wireless network. Details please refer to your client
(computer, game consoles etc.).