User's Manual

300Mbps Wireless N NAS Rout
www.phicomm.com
3
Chapter 1: Introductio
Internet LED: The Internet LED lights up when there is a connection made through the
Internet port. It flashes to indicate network activity over the Internet port.
LED (1~4): These LEDs are corresponding with the LAN ports on the rear panel. The LED is
continuously lit when the Router is connected to a device through that port. It flashes to
indicate network activity over that port.
LED Status Indication
POWER
On Power is on
Off Power is off
WLAN
On
The wireless function is enabled
Off The wireless function is disabled
Blinking Sending or receiving data over wireless network
WPS
On
A wireless device has been successfully connected to the network by WPS
function
Off WPS function is disabled
Blinking
A wireless device is connecting to the network by WPS function. This process
will last in the first 2 minutes
USB
On A storage device or printer has connected into the USB port
Off No storage device or printer is plugged into the USB port
Blinking Data is transmitting
Internet
On Internet port is connected
Off Internet port is unconnected
Blinking Data is transmitting
LAN
(Port 1-4)
On LAN port is connected
Off LAN port is unconnected
Blinking Data is transmitting