User's Manual

150Mbps Wireless N Router
www.phicomm.com
18
Chapter 3: Router Configuration
Wireless Settings
There are seven submenus under the wireless menu: Wireless Basic Settings, Wireless Security
Settings, Wireless MAC Address Filter, Advanced Wireless Settings, Wireless Clients List,
WPS Settings and WDS Settings. Click any of them, you will be able to configure the
corresponding function.
Wireless Basic Settings
Wireless Status: Choose Enable to enable the wireless function of the router, choose Disable to
disable the wireless function of the router.
SSID: Enter a value of up to 32 characters. This is the name of your wireless network, you can
give it a different name which can be easier for you to remember.
MSSID Access Local Network: If you choose Enabled, the host connect to MSSID can access
local network.
Wireless Mode: If all of the wireless devices connected with this wireless router are in the same
transmission mode (eg. 802.11b), you can choose "Only" mode (eg. 11b only). If you have some
devices which use a different transmission mode, choose the appropriate "Mixed" mode.
Channel: The router can choose the best channel automatically in most cases. Please try to