User's Manual

150Mbps Wireless N Router
www.phicomm.com
23
Chapter 3: Router Configuration
network client and the router through encrypted contents. The users only enter the PIN code to
configure without selecting encryption method and entering secret keys by manual.
WPS Mode: Supports two ways to configure WPS settings: PBC (Push-Button Configuration) and
PIN code.
PBC: Select the PBC button or press the WPS button on the panel of the Router. (Press WPS
button and WPS LED will blink, which means the WPS function is enabled. During the blinking
time, press the WPS button on another network device, WPS LED light will become solid when
the connection succeeds.)
PIN: If this option is enabled, you need to enter a wireless clients PIN code in the blank and keep
the same code in the client.
WDS Settings
The WDS function can help you extend the wireless range, it supports Bridge Mode and
Repeater Mode.
Bridge Mode: You can wirelessly connect two or more wired networks via this mode. In this
mode, you need to add the wireless MAC address of the connecting device into the Routers AP