User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Router Configuration
- Chapter 4: Specification
- Appendix A: Troubleshooting
- Appendix B: Certification
- Appendix C: Glossary
150Mbps Wireless N Router
www.phicomm.com
27
Chapter 3: Router Configuration
Port Triggering
Click Add button.
Application Name: Describe the name of the application that being set.
Please select one of the applications: There are few common applications available such as
Dailpad, MSN gaming, PC Phone etc. the blank will be automatically filled once been chosen.
Customize Application Name: If the application you want to add is not included, enter the
blank manually.
Start/End Trigger Port: The port for outgoing traffic. An outgoing connection using this port
will trigger this rule.
Protocol: The protocol used for Trigger Ports: TCP, UDP or TCP/UDP. If you are not clear about
which protocol was being used, TCP/UDP is recommended.
Open Port: The port or port range used by the remote system when it responds to the outgoing
request. A response using one of these ports will be forwarded to the PC that triggered this rule.