RFID Tag - Credit Card Datasheet

1023_1_Product_Manual created: 10/12/07 Page 5
Run the program 1. RFID-full and check that the box labelled Attached contains the word
True.
Click on the Antenna Enabled box to enable the antenna.2.
Click on the LED Enabled box to turn the LED on.3.
The Output 0 box controls the +5V digital output and the Output 1 box controls the 4.
external LED digital output.
Bring an RFID tag close to the PhidgetRFID board and check that the identification string 5.
is displayed. Make sure that the Antenna is enabled for this step.
1
2
3
4
5