Datasheet

Revision 3/2/2015

WWW.PHIHONG.COM

33.6W Power over Ethernet Adapter

High Power Single Port Injector

Features

 Compliant with the IEEE802.3at

Standard

 Cisco AP1250 Full Power Support

 Non-Vented Case

 Diagnostic LEDs

 Full Protection OCP, OVP

 Gigabit Compatible

 1 Year Warranty

Applications

 IP Telephones

 Security Cameras with Pan/Tilt/Zoom

 Wireless Network Access Points

 IP Print Servers

 Blue Tooth Access Point

Safety Approvals

 CE

 cUL/US

 C-Tick

 SAA

Mechanical Characteristics

 Length: 140mm (5.51in)

 Height: 36mm (1.42in)

 Width: 65mm (2.55in)

 Weight: 0.2Kg (0.44lb.)

Output Specifications

Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at

www.phihong.com for the most up-to-date specifications and contact information.

Model

DC Output

Voltage

Load

Regulation

Min.

Max.

Line

Load

POE36U-1AT

56V

0.60A

54-57Vdc under all conditions

PAGE 1
WWW.PHIHONG.COM 33.6W Power over Ethernet Adapter High Power Single Port Injector Features  Compliant with the IEEE802.3at Standard  Diagnostic LEDs  Gigabit Compatible     Cisco AP1250 Full Power Support Non-Vented Case Full Protection OCP, OVP 1 Year Warranty Applications  IP Telephones  Wireless Network Access Points  Blue Tooth Access Point   Security Cameras with Pan/Tilt/Zoom IP Print Servers   cUL/US SAA   Height: 36mm (1.42in) Weight: 0.2Kg (0.44lb.
PAGE 2
WWW.PHIHONG.COM POE36U Characteristics INPUT: AC Input Voltage Range 90 to 264VAC AC Input Voltage Rating 100 to 240VAC AC Input Current 1.0A (RMS) and 90VAC at maximum load .55A (RMS) and 240VAC at maximum load AC Input Frequency 47 to 63Hz Immunity ESD: RS: EFT: Surge: CS: Voltage Dips Harmonic: EN61000-4-2. Level 3 EN61000-4-3. Level 2 EN61000-4-4. Level 2 EN61000-4-5. Level 3 EN61000-4-6.
PAGE 3
Gigabit Power Injector Block Diagram Description of LED Functions for Gigabit Power Injector Power-up Sequence: Upon power-up, all 3 LEDs will light for 2 seconds, as part of the self-test for the internal microprocessor software. After the end of the 2 seconds, the "ON" LED will illuminate green, signifying that the DC output voltage is available for powering a compliant load (to the 802.3at PoE standards).