Data Sheet

Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date
specifications and contact information. Revised 4/2/2020
Model PPL36W-120L6 PPL36W-135 PPL36W-150 PPL36W-160
Output
DC Output Voltage 12.0V 13.5V 15.0V 16.0V
Max Current 3.0A 2.66A 2.4A 2.25A
Output Power 36.0W 35.91W 36.0W 36.0W
Regulation ± 5% ± 5% ± 5% ± 5%
Ripple & Noise P-P(max)
2
120mV 135mV 150mV 160mV
Input
AC Input Voltage Range 90 to 264VAC
AC Input Frequency 47 to 63Hz
Input Current 1.0A max
Inrush Current 70A max., 230VAC (Cold Start at ambient 25°C)
No Load Power Consumption
at 115VAC Input
0.032W 0.038W 0.045W 0.043W
No Load Power Consumption
at 230VAC Input
0.054W 0.064W 0.066W 0.07W
115VAC Average Efficiency
3
87.6% 88.4% 88.5% 88.1%
230VAC Average Efficiency
3
87.9% 88.4% 88.6% 88.4%
230VAC 10% Load Efficiency
3
84.9% 84.7% 84.4% 84.6%
Leakage Current <0.25mA
Protection
Over-Voltage 180% max 180% max 180% max 180% max
Short Circuit Auto-recover after short-circuit fault is removed
Over-Current 170% max 200% max 200% max 200% max
Environmental
Operating Temperature 0⁰C to +40⁰C
Non-Operating Temperature -20⁰ to +80⁰C
Operating Humidity 20 to +80%
Safety
Approvals and
EMC
Dielectric Withstand (HI-POT) Primary to Secondary: 3000VAC for 1min, 10mA
Insulation Resistance Primary to Secondary: 10M ohm for 500VDC
Standards cULus 62368-1, IEC 62368-1
EMI Emissions
FCC Part 15 Class B, CAN ICES-003(B)/NMB-003(B),
EN 55032/CISPR 32 Class B Conducted and Radiated
Harmonic Current Emissions IEC 61000-3-2
Voltage Fluctuations & Flicker IEC 61000-3-3
Immunity
EN 55024/CISPR 24: IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4,
IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11
Mechanical
Dimensions (L x W x H) 99mm (3.90in) x 50mm (1.97in) x 33mm (1.3in)
Weight 170g
Cable Length 1500mm
DC Cable Type 18 AWG 18 AWG 18 AWG 18 AWG
DC Output Connector 2.1mm x 5.5mm x 10.0mm
DC Plug Pin Assignment Inner (V+) / Outer GND (V-)
Input Connector IEC 60320 C8