Operation Manual

7
EN
1A23
BEFORE USING
BEFORE
USING
Location of Controls
Remote Control
1 2 3 СH +
4 5 6 СH
-
7 8 9
. 0 ALT.CH
STANDBY-ON
DISPLAY
SETUP STILL AUDIO EPG
OKRETURN
9
1
2
3
4
6
5
8
11
7
10
12
1 STANDBY-ON button: Turns STB on and off.
2 Number buttons: Input channel numbers and passwords.
3 SETUP button: Enters or quits “SETUP” menu.
4 STILL button: Pause the image while you continue to listen to the audio.
5 Navigation buttons K / L / s / B : Moves the highlight up, down,
left or right.
6 RETURN button: Returns to the previous screen in “SETUP” menu or
exits from the menu.
7 CH / buttons: Change the channels up or down.
8 ALT. CH: Returns to the channel you were last watching.
9 DISPLAY button: Displays information on the channel banner or clears
the banner.
10 EPG button: Displays or exits the Electronic Program Guide.
11 AUDIO button: Selects alternative audio languages (if available).
12 OK button: In “SETUP” menu, press to enter your selection.
• To operate this STB with a universal remote, check the instruction manual for
remote and find Philco brand STB code. If you do not find the code or the
code does not work, try to use Sylvania brand STB code instead.
Front Panel
POWER
1 2
1 Remote control sensor: Receives signals from
your remote control so you can control the STB from a
distance.
2 POWER indicator: Lights up while STB is on.
When you turn the STB on, it blinks first and then
lights up.
When you turn the STB off, it blinks first and then goes
off.
Rear Panel
AUDIO OUT
RL
VIDEO
ANT. IN
OUT
ANT. ΟUΤ
1 2 3 4 5
1 AC power cord: Connect to AC outlet.
2 AUDIO OUT jacks (Right (red) / Left (white)): Connect your TV, stereo system or VCR with standard
audio cables.
3 VIDEO OUT jack (yellow): Connect your TV or VCR with a standard video cable.
4 ANT. IN jack: Connect an antenna.
5 ANT. OUT jack: Connect to the Aerial jack on your TV to output the signal.
X6032UD_Book.indb 7X6032UD_Book.indb 7 11/28/2007 4:34:32 PM11/28/2007 4:34:32 PM