Owner manual

AV AUTO SELECTOR



Setting up

Scart Input A (VCR2 / CAMERA / DVD RECORDER)

Any AV equipment that does not use a direct Scart

to Scart connection, or Scart equipment that does

not have its’ own automatic switching voltage

should be connected to the AV Auto Selector using

Scart Input A (for example, a camcorder that uses a

3 phono to Scart connection).

Scart Inputs B and C (VCR / SAT / DVD PLAYER)

Satellite receivers, VCRs, games consoles, etc., that

use a fully wired Scart to Scart connection (with

automatic switching facility) can use either Scart

Input B or Scart Input C.

28520

28520SP

28520R

28520HS

Phono Output 1

Phono Output 1 (video, left and right audio)

provides the same signals as the TV/Monitor

Scart output. A second TV or another VCR can be

connected here (using a 3 Phono to 3 Phono lead,

or 3 Phono to Scart lead as appropriate). Use the

audio Phono outputs (marked white for the left

channel, red for the right channel) to connect to a

Hi-Fi or amplier.

Phono Output 2

Phono Output 2 (video, left and right audio)

can be connected to the output of the TV.

Continued overleaf

VCR2 / Camcorder, etc.

Satellite receivers /

VCR / Cable / Freeview

Hi-Fi and Amplier

DVD player / DVD recorder

TV / LCD Display

Philex Customer Careline 08457 573479

PAGE 1
AV AUTO SELECTOR 28520 28520SP 28520R 28520HS Philex Customer Careline 08457 573479 Setting up Scart Input A (VCR2 / CAMERA / DVD RECORDER) Phono Output 1 Any AV equipment that does not use a direct Scart to Scart connection, or Scart equipment that does not have its’ own automatic switching voltage should be connected to the AV Auto Selector using Scart Input A (for example, a camcorder that uses a 3 phono to Scart connection).
PAGE 2
Phono Output 2 continued from overleaf Connection via a fully wired (21 pins all connected) Scart to Scart lead will allow playback of sound and video independent of eachother whilst copying or watching TV programmes. For example, when in AV mode most modern TVs will show the channel set on the tuner (via the Scart socket). In this way you can view a programme from the satellite receiver whilst your VCR is recording the programme received by the TV’s tuner.