User's Manual

Report

Period

3 Threshold

of Watt

for Load

Caution

2 10-1100

1watt

1100

4 Threshold

of KWH

for Load

Caution

2 1-10000 1KWh 10000

5-1 Watt Meter Report Period:

If the setting is configured for 1hour (set value =720), the PAN08 will report its

instant power consumption every 1 hour to the node of correspond Group. The

maximum interval to report its instant power consumption is 45 hours

(5s*32767/3600=45hr). Default value is 1 hour

5-2 KWH Meter Report Period:

If the setting is configured for 1hour (set value =6), the PAN08 will report its

Accumulated Power Consumption (KW/h) every 1 hour to the node of correspond

Group. The maximum interval to report its Accumulated Power Consumption

(KW/h) is 227.55 days (10min*32767/1440=227.55 days). Default value=1 hour

5-3 Threshold of Watt for Load Caution

This is a warning when the wattage of load over the preset threshold value, If the

setting value is 1100, when the load wattage over this value, PAN08 will send Watt

Meter Report command to the node of correspond Group. Default value=1100W

5-4 Threshold of KWh for Load Caution

This is a warning when the KWh of load over the preset threshold value, If the

setting value is 10000, when the Accumulated Power Consumption of Relay1 or

Relay2 over this value, PAN08 will send KWh Meter Report command to the node of

correspond Guoup, minimum value is 1KWh and default value is 10000 kWh

6. Command Classes

The Switch supports Command Classes including…

* COMMAND_CLASS_SWITCH_BINARY

* COMMAND_CLASS_BASIC

* COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

* COMMAND_CLASS_VERSION

* COMMAND_CLASS_ASSOCIATION

* COMMAND_CLASS_METER_V3

* COMMAND_CLASS_CONFIGURATION

* COMMAND_CLASS_SWITCH_MULTILEVEL_V3

* COMMAND_CLASS_ALARM

Troubleshooting

Symptom Cause of Failure Recommendation