User Manual

France type PAN11-2

UK type PAN11-3

PAN11-4 (USA/Canada)

PAN11-5 (Taiwan/JP)

Note:

Please make sure that the intensity of the plug of the electrical device must be

16A and have same head as the enclosed plug before inserting to the socket.

Troubleshooting

Symptom Cause of Failure Recommendation

The Switch not working and

LED off

1. The Switch is not

plugged into the

electrical outlet

properly

2. The Switch break

down

1. Check power connections

2. Don’t open up the Switch and

send it for repair.

The Switch LED

illuminating, but cannot

control the ON/OFF

Switch of the load attached

Check if the load plugged

into the Switch has its

own ON/OFF switch

Set the ON/OFF switch of the load

attached to ON

The Switch LED

illuminating, but the

1. Not carry out

association

1. Carry out association

2. Wait for a while to re-try