User Manual

When PAN15 detects the current is more than 14.5A, it will send Alarm Report to
Group 1 node.
The content of Alarm Report
2-2 Response to Meter Get Command
The Switch will report its (1) instant Power Consumption (Watt) or (2) accumulated
power consumption(KWH) or (3) AC load Voltage (V) or (4) AC load current ( I )
(5) load power factor (PF) to Z-Wave Controller after receive the Meter Get
Command from Z-Wave Controller.
2-2-1 Instant Power Consumption (Watt) of Switch
When receiving Meter Get Command, it will report Meter Report Command to the
node.
Meter Get Command: [Command Class Meter, Meter Get, Scale =0x02(W)]
Meter Report Command: [Command Class Meter
，
，，
，
Meter Report
，
，，
，
scale(bit
2) +Rate Type +Meter Type
，
，，
，
Precision + Scale(bit 1,0)+ Size
，
，，
，
Meter
Value 1
，
，，
，
Meter Value 2
，
，，
，
Meter Value 3
，
，，
，
Meter Value 4]
Rate Type = 0x01
Meter Type = 0x01
Precision = 1
Scale = 0x02(W)
Size = 4 Bytes (Meter Value)
Meter Value 1 = (W) MSB
Meter Value 2 = (W)
Meter Value 3 = (W)
Meter Value 4 = (W)LSB
Example:
Meter Value 1 = 0x00 (W)
Meter Value 2 = 0x00 (W)
Meter Value 3 = 0x03 (W)
Meter Value 4 = 0xEA (W)
Meter(W) = Meter Value 3 *256 + Meter Value 4 = 100.2W
2-2-2 Accumulated Power Consumption (KW/h)
When receiving Meter Get Command, it will report Meter Report Command to
the node.
Meter Get Command: [Command Class Meter, Meter Get, Scale = 0x00
KW/h)]
5
Meter Report Command: [Command Class Meter，
，，
，Meter
Report，
，，
，scale(bit 2) +Rate Type +Meter Type，
，，
，Precision + Scale(bit
1,0)+ Size，
，，
，Meter Value 1，
，，
，Meter Value 2，
，，
，Meter Value 3，
，，
，Meter Value
4]
Alarm report command: [Command_Class_Alarm, Alarm_Report, Alarm Type = 0x08,
[Command_Class_Alarm, Alarm_Report, Alarm Type = 0x08, [Command_Class_Alarm, Alarm_Report, Alarm Type = 0x08,
[Command_Class_Alarm, Alarm_Report, Alarm Type = 0x08,
Alarm Level =
Alarm Level =Alarm Level =
Alarm Level = 0xFF]
0xFF] 0xFF]
0xFF]