User's Manual
NO. Name Def. Valid A B C Description
0
Bit6: Disable the humidity report after
event triggered. (1:Disable, 0:Enable)
0 Bit7: Reserve.
7
(*)
Customer
Function
All 0 0 0
Customer function switch, using bit
control.
0 Bit0: Reserve.
0 Bit1: Reserve.
0 Bit2: Reserve.
0 Bit3: Disable send out BASIC OFF
after the flood event cleared.
(1:Disable, 0:Enable)
0 Bit4: Notification Type,
0: Using Notification Report.
1: Using Sensor Binary Report.
0
Bit5: Disable Multi CC in auto report.
(1:Disable, 0:Enable)
0 Bit6: Disable to report battery state
when the device triggered. (1:Disable,
0:Enable)
0
Bit7: Reserve.
10
Auto
Report
Battery
Time
12
0 ~
127
The interval time for auto report the
battery level.
0 means turn off auto report.
The default value is 12. The tick time
can setting by the configuration No.20.
NO. Name Def. Valid A B C Description
13
Auto Report
Temperatur
e Time
12
0 ~
127
The interval time for auto report the
temperature.
0 means turn off auto report.
The default value is 12. The tick time
can setting by the configuration No.20.
14
Auto Report
Humidity
Time
12
0 ~
127
The interval time for auto report the
humidity.
0 means turn off auto report.
The default value is 12. The tick time
can setting by the configuration No.20.
15
Auto Report
Flood Time
12
0 ~
127
The interval time for auto report the
flood state.
0 means turn off auto report.
The default value is 12. The tick time
can setting by the configuration No.20.
20
Auto Report
Tick
Interval
30
0 ~
0xFF
The interval time for auto report each
tick. Setting this configuration will
effect configuration No.10, No.13,
No.14 and No.15.
Units of one minute.
Caution1:
Setting to 0 means turn
off all auto report function.
Caution2
: The value is unsigned byte
21 Temperature
Differential
Report
1 0 ~
0x7F
The temperature differential to report.
0 means turn off this function.
The unit is Fahrenheit.
Enable this function the device will
detect every 10 seconds.
And when the temperature is over 140
degree Fahrenheit, it will continue
report.
7