User's Manual

PHILIO Z-Wave Utility Manual
2. Main Function:
Include or exclude the device from the network, and also can add the
dongle to the other network.
3. Controller Function:
User can abort the operation, reload or reset the information of the
controller.
4. Device List:
Display the device information of the controller.
5. Message:
Display the operation result or the status.
7.1.Include Device
Add a Z-Wave device to the Z-Wave network, the controller should include it.
But before you execute the include operation, please make sure that device is
not be included to other network. If it is, please operate the exclude
procedure first.
To execute the include operation; please press the “Include” button.
The all buttons of the main function part will be disabled. And the controller
will into to inclusion mode. If you want to abort the include operation, please
press the “Abort” button in the controller function part.
Figure 5 Controller into inclusion mode
Philio Technology Corporation Page 11
CONFIDENTIAL