User's Manual

PHILIO Z-Wave Utility Manual
Now press the learning key on the device, usually the Z-Wave devices made
from Philio, press the learning key three times the device will into the learn
mode. If the controller got that message, the UI will show a progress bar, the
dongle will query some information from the device.
Figure 6 Query the information from the device
After all done, the all buttons of the main function part will recover, and in the
device list part will add a new device record. The message part will show a
new device was added, and which node id it is.
Figure 7 Include a new device
PS: In the including procedure, you may saw the “Report Form” pop up. More
information of the “Report Form”, please refer to the “8 Report Form”.
Philio Technology Corporation Page 12
CONFIDENTIAL